Silverline Angle Grinder Metal Grinding Disc 115mm 224514 Sold in Singles

Silverline Metal Grinding Discs 115mm 6mm 22.23 Centre Sold in Singles

Pack of 1 x Disc

MPN: 224514

Barcode: 5060012962869

Silverline Metal Grinding Disc 115mm for Angle Grinders – Single Disc

Product Overview:
The Silverline 115mm Metal Grinding Disc is designed for efficient material removal on a range of ferrous metals. Suitable for use with standard 115mm (4½") angle grinders, this disc delivers consistent performance when grinding welds, shaping metal, or preparing surfaces. Engineered for durability and precision, it's ideal for both professional tradespeople and DIY users tackling metalworking projects.

• 1 x Metal Grinding Disc
• Resin-bonded glass fibre reinforced aluminium oxide metal grinding discs.
• Used for grinding ferrous and non-ferrous metals.
• Suitable for metal-grinding applications (not suitable for aluminium or brass)
• Compatible with 22.23mm bore angle grinders.
• Manufactured to EN12413 and MPA approved.
• Max 13,300rpm.

Key Features:

• Disc Size: 115mm diameter x 6mm thick with 22.23mm bore

• Material Use: Effective on mild steel and other ferrous metals

• Construction: Bonded abrasive for reliable performance and longevity

• Compatibility: Fits most 115mm angle grinders with a standard bore

• Application: General-purpose metal grinding, edge smoothing, and weld cleaning

Common Uses:

• Grinding welds smooth in fabrication work

• Preparing steel surfaces for painting or welding

• Removing rust or burrs from metalwork

• Shaping brackets, plates, and steel bars

Frequently Asked Questions:

1. Can this disc be used for cutting metal?
   No, it is specifically designed for grinding. Use a dedicated cutting disc for metal cutting tasks.

2. Is this suitable for stainless steel?
   While it can grind stainless steel, a disc specifically rated for stainless is recommended to prevent contamination.

3. Will it fit a DeWalt or Bosch angle grinder?
   Yes, if your grinder accepts 115mm discs with a 22.23mm bore, it will fit.

4. Does it require a backing pad?
   No, grinding discs like this one are used directly with the grinder's locking flange.

5. Can I use it on aluminium?
   It is not recommended, as aluminium can clog the abrasive surface and reduce efficiency.

6. What’s the maximum RPM rating?
   Typically up to 13,300 RPM – always check the disc label for specific speed limits.

7. How long does the disc last?
   Longevity depends on usage intensity, material hardness, and applied pressure.

8. Is protective gear required when using this disc?
   Yes, always wear eye protection, gloves, and appropriate PPE during use.