Blue Spot Tools Ironmongery 152mm Zinc Plated Cabin Hook 78044

Blue Spot Tools Ironmongery 152mm Zinc Plated Cabin Hook

MPN: 78044

Barcode: 5028734780444

Size: 152mm

Weight: 0.14kg

Overview:

This 152mm zinc-plated cabin hook from Blue Spot Tools is built from carbon steel. The zinc-plated finish guards against corrosion for outdoor use. It suits permanent installations on wooden gates, shed doors, and fences.

The hook comes complete with all necessary fittings, ready to install straight from the pack. Blue Spot Tools backs the hook with a 5-year guarantee.

Key Features and Benefits

• Carbon Steel Construction: Provides the strength needed for repeated outdoor use on gates and shed doors.
• Zinc Plated Finish: Resists rust and corrosion in outdoor conditions, including exposure to rain and moisture.
• 152mm Hook Length: Suits standard garden gates, shed doors, and fence panel gates without the need for trimming or adjustment.
• Fittings Included: All hardware required for installation comes in the pack - no separate purchase needed.
• 5 Year Guarantee: Blue Spot Tools backs this hook for five years from the date of purchase.

Specs & Attributes

• Size: 152mm
• Weight: 0.14kg
• Material: Carbon steel
• Finish: Zinc plated
• Use: External

Typical Applications

• Securing wooden garden gates in an open or closed position
• Holding shed doors against wind movement
• Fastening fence panel gates
• Latching outbuilding and summerhouse doors
• Securing exterior wooden doors on garages or workshops
• Restraining barn-style side doors

How to Use

• Position the Eye Plate: Hold the eye plate against the door frame or post at the intended catch point. Mark the fixing holes with a pencil.

• Fix the Eye Plate: Drill pilot holes at the marked points, then screw the eye plate firmly into position.

• Align the Hook Plate: Close the door or gate and hold the hook plate against it. Position it so the hook sits level with the eye. Mark the fixing holes.

• Fix the Hook Plate: Drill pilot holes and screw the hook plate to the door or gate.

• Test the Action: Open and close the door to check that the hook drops cleanly into the eye. Adjust either plate if needed before final tightening.

Frequently Asked Questions (FAQs)

• What is a cabin hook used for?
  A cabin hook is a simple latch that holds a door, gate, or window in an open or closed position. The hook slots into an eye plate to keep the door secure against movement or wind.

• Can cabin hooks be used outdoors?
  Yes, provided the finish suits outdoor exposure. Zinc-plated hooks resist corrosion and are designed for gates, shed doors, and fences in outdoor settings.

• What size cabin hook do I need for a garden gate?
  For a standard garden gate or shed door, a hook between 100mm and 152mm is typically sufficient. Heavier or wider doors benefit from a longer hook for greater stability.

• What is the difference between zinc-plated and galvanised cabin hooks?
  Zinc plating applies a thin zinc layer via electroplating and offers good protection for general outdoor use. Hot-dip galvanising applies a thicker coating, better suited to very exposed or coastal locations.

• Will a cabin hook hold a gate shut in windy conditions?
  A standard cabin hook holds a gate closed in moderate conditions. For exposed or consistently windy positions, a heavier hook or one with a safety catch provides a more secure hold.

Summary

The Blue Spot Tools 152mm zinc-plated cabin hook is a carbon steel gate and door latch built for permanent outdoor use. It comes with all installation fittings included and carries a 5-year guarantee from Blue Spot Tools.