Everbuild Black Jack 10m 75mm Flashing Tape FLAS075 482958

Everbuild Flashing Tape - 10 meters long x 75mm wide - Grey Lead Look - 482958

Barcode: 5029347099015

Sika Code: 482958

MPN: FLAS075

Size: 10m x 75mm

Length: 10 Meters

Width: 75mm

Colour: Grey Lead Look

Product Overview:

The Everbuild Black Jack Self-Adhesive Flashing Tape 10m x 75mm is a professional-grade, lead-look waterproof tape ideal for sealing, flashing, and repairing roofs, gutters, and joints. Designed with a durable aluminium foil facing and a high-tack bitumen rubber adhesive, this self-adhesive flashing tape provides a fast, effective, and long-lasting waterproof seal.

With its 75mm width and 10-metre length, this roll is perfect for small-to-medium repair jobs, offering excellent adhesion to concrete, brick, wood, metal, and roofing felt. The flexible aluminium surface adapts easily to uneven areas, ensuring a strong, weatherproof seal that resists UV exposure and temperature fluctuations.

Easy to apply and requiring no separate adhesive, the Everbuild Black Jack Flashing Tape is ideal for quick repairs or long-term maintenance work around the home or job site.

Key Features and Benefits

• Self-Adhesive Backing: No additional glue or primer needed – simply peel, position, and press into place.

• Durable Aluminium Finish: Provides long-lasting protection and a professional lead-look appearance.

• Waterproof and Weatherproof: Offers reliable sealing against rain, wind, and moisture.

• Flexible and Strong: Conforms to irregular surfaces for secure adhesion and movement accommodation.

• High-Tack Adhesive: Ensures a permanent bond to most common building materials.

• Quick Application: Ideal for both DIY users and professionals needing instant waterproofing.

• UV Resistant: Designed for outdoor exposure without degradation.

• Cost-Effective Lead Replacement: Mimics the look and performance of traditional lead flashing at a fraction of the cost.

Typical Applications

• Repairing or replacing existing roof flashing

• Sealing gutter joints and capping bolts

• Flashing around chimneys, skylights, or roof glazing

• Repairing cracks in concrete, roofing felt, or lead gutters

• Flashing parapet walls and roof ridges

• Creating a waterproof seal between timber, brick, or blockwork

• Sealing between dissimilar materials in construction and roofing work

How to Use

1. Ensure all surfaces are clean, dry, and free from dust, grease, or loose materials.

2. Measure and cut the required length using a sharp knife or scissors.

3. Peel back a few centimetres of the release film and position the tape on the surface.

4. Gradually remove the rest of the release film while pressing the tape down firmly by hand.

5. Use a seam roller or cloth to smooth out any air bubbles or creases.

6. Overlap joints by at least 25mm to ensure a watertight seal.

Product Specifications

• Material: Aluminium foil with bitumen rubber adhesive backing

• Length: 10 metres

• Width: 75mm

• Colour: Grey (Lead-look finish)

• Application Temperature Range: +5°C to +30°C

• Storage: Store in a cool, dry place away from direct sunlight

• Shelf Life: Up to 24 months when stored correctly

FAQs – Everbuild Black Jack Flashing Tape 10m x 75mm

• What is this tape used for?
  It’s used for sealing and repairing roofs, gutters, joints, and cracks to prevent water ingress.

• Can it be used outdoors?
  Yes, it’s fully weatherproof and UV-resistant for long-term outdoor applications.

• Does it need extra adhesive?
  No, it’s self-adhesive and ready to apply straight from the roll.

• What materials will it stick to?
  It bonds to concrete, brick, wood, metal, and roofing felt.

• Can it be painted?
  Yes, it can be overpainted with most conventional coatings.

• Can it replace lead flashing?
  Yes, it offers a similar look and performance without the expense or weight of lead.

• How long does it last?
  When applied properly, it provides many years of waterproof protection.

• What’s the ideal temperature for application?
  Between +5°C and +30°C for optimal adhesion.

Notes:

Prime porous surfaces with Everbuild flashing primer. Do not apply to damp surfaces.

In cold weather adhesion may be reduced. Bring up to temperature or heat bitumen adhesive layer with a hot air gun to improve adhesion and pliability.

Preparation: Surfaces must be dry, Sound free from oil, grease and dust Remove all loose material by scraper or wire brush.

Porous surfaces, such as concrete or brick, should be primed using Everbuild flashing tape primer.

Awkward areas and tops of existing lead flashing can be pointed using Everbuild Lead mate larger flat areas can be coated with Evercryl Fibre reinforced coating.

"Always read the Technical Datasheet prior to first use to ensure you have the correct information and  product for your application"

All Flashing Tape Products