Fixman Domed Head Blind Pop Rivets 4.8mm x 10mm 250pk 567399

Fixman Domed Head Blind Pop Rivets 4.8mm x 10mm - Pack of 250

Barcode: 5024763175695

Code: 567399

Overview:

Fixman 4.8mm x 10mm Domed Head Blind Pop Rivets 250pk are a strong, general-purpose rivet for jobs where you need a permanent fixing but only have access to one side of the material. The 4.8mm diameter offers increased holding power for heavier-duty applications, while the domed head leaves a neat, professional finish. Manufactured with an aluminium body and steel mandrel, these rivets provide reliable setting and good corrosion resistance for indoor and light outdoor use. Supplied in a 250 pack, they’re ideal for trade, workshop, automotive and fabrication tasks where consistent results matter.

Key Features

• Domed head for a smooth, tidy finish

• Blind rivet design for single-sided installation

• Heavy-duty 4.8mm diameter for stronger fixings

• Aluminium body with steel mandrel for dependable clamping strength

• Suitable for metal, plastic and timber assemblies

• Compatible with standard manual and pneumatic rivet tools

• Pack of 250 for workshop and high-use environments

Specifications

• Brand: Fixman

• Product Type: Domed Head Blind Pop Rivets

• Diameter: 4.8mm

• Length: 10mm

• Head Type: Domed

• Body Material: Aluminium

• Mandrel Material: Steel

• Grip Range: Approx. 3mm to 6mm (material stack)

• Pack Quantity: 250

• Tool Compatibility: Standard 4.8mm rivet guns (manual or pneumatic)

• Product Code: 567399

Applications

• Fixing thicker sheet metal and structural panels

• Automotive bodywork and panel repairs

• Joining aluminium, steel and plastic components

• Enclosures, cabinets, ducting and general metalwork

• Construction, maintenance and workshop fabrication

How to Use

• Drill or pre-punch a clean hole to suit the rivet diameter

• Insert the rivet through the aligned materials from the accessible side

• Fit the mandrel into a compatible 4.8mm rivet gun

• Squeeze/activate until the rivet sets and the mandrel snaps

• Inspect the joint and remove the snapped mandrel stem safely

Fixman Domed Head Blind Pop Rivets 4.8mm x 10mm – Key FAQs

• What drill size should I use for 4.8mm pop rivets?
  Use a drill bit that matches the rivet diameter for a snug fit. Accurate hole sizing helps the rivet set correctly and improves joint strength.

• What grip range do these 4.8mm x 10mm rivets cover?
  They’re designed for a combined material thickness of approximately 3mm to 6mm, depending on the materials being joined and hole quality.

• Can these rivets be fitted from one side only?
  Yes. They’re blind rivets, so they’re ideal when you can’t access the rear of the workpiece, such as panels, ducting and enclosures.

• Are these suitable for steel panels?
  Yes. They can be used on steel, aluminium and plastic assemblies, provided you choose the correct size and grip range for the material thickness.

• Are pop rivets reusable?
  No. Pop rivets are permanent, single-use fixings. If you need to remove them, they’re usually drilled out.

• Do the domed heads sit flush?
  Domed heads sit slightly proud of the surface, providing a neat, finished appearance rather than a fully flush countersunk fit.

• Can I use a standard manual rivet gun?
  Yes, as long as your rivet tool supports 4.8mm rivets. Pneumatic tools can also be used for faster, repetitive installation.

Explore the full range of Fixman Pop Rivets and find the perfect rivet for your needs.

For more tools and fasteners, visit our Pop Rivets and Rivet Guns section.