Everbuild Febset 45 Rapid Repair Mortar and Bedding Compound 10 Bag Pallet

Everbuild Febset 45 Rapid High Strength Repair Mortar and Bedding Compound 10 Bag Pallet Deal

MPN: FBSET45

Sika Code: 628382

Barcode: 5029347607630

Size: 25kg 10 Bag Pallet = 250kg - Money Saver Deal

Trade Option 10 Bag Pallet Deal 0f Everbuild Febset 45 Rapid High Strength Repair Mortar and Bedding Compound 628382 FBSET45 Large 25kg bag.

Everbuild Febset 45 has a rapid cure a 1 part general purpose specially formulated repair mortar based on magnesia phosphate cement.
Febset-45 is formulated to withstand impact and abrasion and can be used to repair concrete, screeds, stone, brick and steel in even the most demanding domestic and industrial situations.

Designed for rapid bedding installing or steel ironwork and bonding streetscape flags blocks and kerbs. Also suitable for general repairs to concrete stone kerbs steps beams lintels sills and is ideal for repairing floors, steps, pipes, kerbs and sills.

Also the ideal choice for repairing cracks in masonry and concrete.

Also Available:

Everbuild Febset 45 Rapid Repair Mortar and Bedding Compound in Singles

EVERBUILD FEBSET 45 Rapid Key Features and Benefits:

• Larger 25kg bag,
• 10 x on a 1/4 pallet deal Money Saver Deal.
• For use in concrete repair situations where minimum delay and work disruption is of the utmost importance.
• Cold store floor areas.
• Roads and nosing's, bridge decks, quays crane rails.
• Industrial floor areas, loading bays and warehouses.
• Around fixing bolts.
• Raising and levelling manhole covers, gratings, hydrants etc.
• Excellent impact and wear resistance.
• For repairing heavy traffic areas.
• For repairing steps.
• For repairing walkways ramps.
• For repairing industrial floors.
• Easy to mix and apply.
• Patching steps and window sills.
• Pointing brick and stone.
• Repairs to ponds and pools needs to be painted when fully dry.
  
• Leak sealing in concrete based surfaces.
• Internal and external repairs to gaps cracks in walls and floors.
• Minimum delay to traffic and production.
• When used to repair concrete paving's, it permits early re-opening to traffic within 45 minutes at 20 degree C.
• Ready for use only requires the addition of water.
• No secondary bonding agents required.
• Excellent resistance to de-icing salts.
• Can be placed in sub-zero temperatures.
• Non Shrinking.
• Colour Grey.
• Coarse aggregate can be added to the mix.
  

Important Notes:

Febset 45 Curing Time:

• High strength at a very early stage 45 minutes.
• Chemical setting process takes place within approximately 15 minutes at 20 degree C.
• High early strength to receive heavy traffic within a period of less than one hour at 15 to 20 degree C.
• Workability at 20 degree C Approximately 5 to 12 minutes
  

Priming Process:

• Although secondary bonding agents are not required, the area to be repaired must be thoroughly pre-wetted with clean water.
• Care should be taken to ensure that all standing water is removed.
  

Important Mixing Instructions:

1. The following sequence must be followed at all times when mixing Febset 45.
2. A suitable mixer i.e. tilting drum should be located as near as possible to the area of work.
3. The amount to be mixed should never exceed that which can be transported, placed, compacted and finished within ten minutes.
4. Wet down the mixer and drain off the free water.
5. Pour the correct measured amount of clean water into the mixer first.

Do not add the water to Febset 45.

1. When adding coarse aggregates, these must be added to the water before the addition of the Febset-45 into the mixer.
2. Empty the full contents of the bag into the mixer.
3. Minimum mixing time is 1 minute.

Febset 45 Workability:

Although stiff at the outset, workability will improve as mixing continues, to give the desired flow characteristics. On no account must further water be added.

It is also essential that no admixtures are added.

Placing and Finishing:

Pre-wet the area to be treated and remove surplus water. Always ensure correct compaction and level surface by ruling with a firm, straight edged tamping bar.

"Always read the Technical Datasheet prior to first use to ensure you have the correct information and  product for your application"

All Cements and Repair Compounds