Everbuild Febset 45 Rapid Repair Mortar and Bedding Compound 628382 FBSET45

Everbuild Febset 45 Rapid High Strength Repair Mortar and Bedding Compound  628382 FBSET45

MPN FBSET45

Sika Code 628382

Barcode 5029347607630

Everbuild Febset 45 Rapid High Strength Repair Mortar and Bedding Compound 628382 FBSET45 Large 25kg bag.

Everbuild Febset 45 has a rapid cure a 1 part general purpose specially formulated repair mortar based on magnesia phosphate cement.

Febset 45 is formulated to withstand impact and abrasion and can be used to repair concrete, screeds, stone, brick and steel in even the most demanding domestic and industrial situations.

Designed for rapid bedding installing or steel ironwork and bonding streetscape flags blocks and kerbs.

Alos suitable for general repairs to concrete stone kerbs steps beams lintels cills and is ideal for repairing floors, steps, pipes, kerbs and sills.

Also the ideal choice for repairing cracks in masonry and concrete.

Everbuild Febset 45 Rapid Benefits and uses

• Larger 25kg bag,
  
• For use in concrete repair situations where minimum delay and work disruption is of the utmost importance.
• Cold store floor areas.
• Roads and nosings, bridge decks, quay,s crane rails.
• Industrial floor areas, loading bays and warehouses.
• Around fixing bolts.
• Raising and levelling manhole covers, gratings, hydrants etc.
• Excellent impact and wear resistance.
• For repairing heavy traffic areas.
• For repairing steps.
• For repairing walkways ramps.
• For repairing industrial floors.
• Easy to mix and apply.
• Patching steps and window sills.
• Pointing brick and stone.
• Repairs to ponds and pools needs to be painted when fully dry.
  
• Leak sealing in concrete based surfaces.
• Internal and external repairs to gaps cracks in walls and floors.
• Minimum delay to traffic and production.
• When used to repair concrete pavings, it permits early re-opening to traffic within 45 minutes at 20 deg C.
• Ready for use only requires the addition of water.
• No secondary bonding agents required.
• Excellent resistance to de-icing salts.
• Can be placed in sub-zero temperatures.
• Non Shrinking.
• Colour Grey.
• Coarse agregate can be added to the mix.
  

Important Notes

Curing Time

• High strength at a very early stage 45 minutes.
• Chemical setting process takes place within approximately 15 minutes at 20 deg C.
• High early strength to receive heavy traffic within a period of less than one hour at 15 to 20 deg C.
• Workablity at 20 deg C Approximately 5 to 12 minutes
  

Priming:

• Although secondary bonding agents are not required, the area to be repaired must be thoroughly pre-wetted with clean water.
• Care should be taken to ensure that all standing water is removed.
  

Mixing:

1. The following sequence must be followed at all times when mixing Febset 45.
2. A suitable mixer i.e. tilting drum should be located as near as possible to the area of work.
3. The amount to be mixed should never exceed that which can be transported, placed, compacted and finished within ten minutes.
4. Wet down the mixer and drain off the free water.
5. Pour the correct measured amount of clean water into the mixer first.

Do not add the water to Febset 45.

1. When adding coarse aggregates, these must be added to the water before the addition of the Febset 45 into the mixer.
2. Empty the full contents of the bag into the mixer.
3. Minimum mixing time is 1 minute.

Workability:

Although stiff at the outset, workability will improve as mixing continues, to give the desired flow characteristics.

On no account must further water be added.

It is also essential that no admixtures are added.

Placing and Finishing:

Pre-wet the area to be treated and remove surplus water.

Always ensure correct compaction and level surface by ruling with a firm, straight edged tamping bar.

Febset 45 Data Sheets

Everbuild Febset 45 Manufacturer Product Page

Everbuild Febset 45 Safety Data Sheet

Everbuild Febset 45 Technical Data Sheet