Everbuild Cemstrip Eco Cement & Stain Remover 5 Litre CEM5

  • £17.75
  • £21.30 Inc. VAT
  • NOW £11.08

  • £13.30 Inc. VAT

  • Availability: In Stock
  • Brand Everbuild
  • Product Code: CEM5
  • Ref: QR23733

Everbuild Cemstrip Cement and Stain Remover 5 Litre Masonry Surface and Tool Cleaner

Barcode: 5029347611026

MPN: CEM5


CEMSTRIP in a 5 litre gallon can is a new type of cement, concrete and mortar stain remover that provides a more environmentally-friendly and safer alternative to conventional

hydrochloric acid based cement removers.

Cemstrip will also remove salts and efflorescence from the surface of mineral substrates and is a very effective general cleaner for removing ingrained dirt,

grease and stains from paths and patios.

Cemstrip is a highly concentrated formula that can be diluted by up to 10 times with water to suit a variety of applications.

Cemstrip is non-hazardous in storage, transport & usage and is fully biodegradable.


Cemstip Benefits:

Safer to use than conventional Hydrochloric acid based products.

Available in bottles or as a ready to use spray.

Water clean up.

Economical, makes up to 10 times the volume of the bottle when diluted.


Areas For Use:

Removes cement, mortar and concrete on most mineral surfaces such as paths, patios and walls.

Cleaning tools, cement mixers and other building equipment.

As a general cleaner for paths, patios and driveways.


Limitations:

Do not use on Marble, granite or travertine.

Do not use on coloured cement based pavers without testing.

Always test a small inconspicuous area prior to full application especially on coloured flags/stones.

Do not use on soft metals such as lead brass, copper or aluminium.

Do not apply to dry surfaces or allow Cemstrip to dry on the surface.

Always thoroughly rinse equipment to prevent further rusting/corrosion.

Avoid overspray on sensitive surface such as brass, copper, stainless steel and aluminium.

Remove any excess material or spills immediately with clean fresh water.

Cleaning mortar or concrete from tools the stronger or older the mix is, the more difficult it will be to remove.

Always wash out spray equipment immediately after use with clean fresh water.

It is the users responsibility to determine suitability for use.

If in doubt contact technical services for advice.


Surface Preparation:

When cleaning path, patios, cement stains etc. from surfaces always thoroughly wet surfaces prior to application.

Do not apply to a dry surface. Always test a small inconspicuous area prior to full application.

When cleaning tools and equipment, pre-wetting is not necessary.


Dilution Usage Rates:

9 parts water to 1 part Cemstrip - Cleaning general stains and ingrained dirt from paths, patios and horizontal surfaces.

2 parts water to 1 part Cemstrip Cleaning light mortar stains from paths, patios, walls or vertical surfaces.

1 part water to 1 part Cemstrip Cleaning heavy mortar stains from walls or vertical surfaces.

Neat Cleaning tools, cement mixers and other building equipment.


5 Litre CEM5 Cemstrip Data Sheets:

Everbuild Cemstrip Technical Data Sheet

Everbuild Cemstrip MSDS Safety Data Sheet

Everbuild Manufacturer Cemstrip Product Page


All Surface Coatings Treatments and Cleaners

Data
Option Text 5 litre
Reference Code CEM5
Name Link
Everbuild Cemstrip Cement Remover Ingredients Data Sheet Download Attachment
Everbuild Cemstrip Cement Remover Instructions Safety Data Sheet Download Attachment
Everbuild Cemstrip Cement Remover Instructions Technical Data Sheet Download Attachment

Related Products