Everbuild 102 Butyl Glazing and Bedding Compound 2kg BUTGC2

Everbuild 102 Premium Butyl Glazing and Bedding Compound 2kg

MPN BUTGC2

Sika Code 489029

Barcode 5029347001223

Everbuild 102 Butyl Glazing and Bedding Compound 2kg BUTGC2 a hand applied glazing compound for sealing and fixing glass into metal or wooden softwood or hardwood frames both internally and externally.

Everbuild 102 Glazing Compound is a semi-setting glazing compound for use in bead or channel glazing where limited structural or thermal movement is required.

For best results apply primer to window and door frame first fro galvanised frames they need to be treated with a passivating liquid or allowed to age correctly.

102 glazing compound can be used with laminated heat absorbing glass and can be used to bed insualted glass units into the frames.

Everbuild 102 Glazing Putty Benefits:

• Easier to apply than most putties.
• Extended shelf life.
• Bedding insulated glass units.
  
• Soft and Hard Wood Wooden and metal frames.
• Added plasticiser improves adhesion and helps prevent cracking.
• Single glazing of pre-treated wooden and metal rebates.
• Suitable for use with laminated heat absorbing glass.
• Can be used for glazing greenhouses both metal and timber construction.
• Elastic formulation moves with the frame.

Evernuild 102 Specification::

• Colour Buff to Brown thick paste.
• Overpaintable when product has skined normally between 7 and 28 days.
• Approximate bedding in usage is 6 meters per 2kg tub depending on rebate.
• Has 5% more movement capabilitys than conventional puttys such as Everbuild 101.
• Can be applied between 5 degree C and 30 degrees C.

How to use Everbuild 102 Glazing Putty:

Glazing:

1. Double glazed units must be taped with impervious tape normally aluminium prior to glazing to prevent any possible reaction with the wide variety of edge sealant formulations currently being used when manufacturing these units.
2. Setting and location blocks, must be used to give a minimum compound thickness of 3mm this is essential.
3. Greater depths may be required in exposed conditions to ensure durability.
4. The channel around the glass must be filled to ensure no air voids remain.

Outside Glazing:

1. Clean the rebates and beads and seal both with two coats of an impervious timber sealer.
2. Clean the perimeter of the glass and apply impervious tape.
3. Apply back bed of Everbuild 102 Butyl Glazing Compound to the rebate.
4. Insert setting blocks and distance pieces as required and insert the unit, pressing in the unit until firmly seated.
5. Insert location blocks.
6. Apply the suitable Everbuild Frame and Glazing Sealant around the edge of the unit to completely fill the perimeter void.
7. Apply further sealant around the edge of the unit to form a bed between the bead and the glass unit.
8. Insert distance pieces of the required thickness bed the bead firmly into the glass, squeezing the sealant up between the bead and the glass until the distance pieces are firmly held between the bead and the glass.
9. Fix the beads into position with sufficient permanent fixings to stop distortion but not to insert to much force at these points.
10. Apply further Silicone to fill the space between the bead and the glass.
11. Tool sealant to a chamfer to shed water, lipping onto the edge of the bead.
12. Trim the back bedding of Everbuild 102 Butyl Glazing Compound and finish to a chamfer to shed water.
    

Glazing Internally:

Use the same method as above, but in reverse.

Bed he unit in Everbuild Frame and Glazing Sealant and fix the beading in Everbuild 102 Butyl Glazing Compound.

Overpainting:

Product service life and performance may be improved by overpainting with oil-based undercoat and gloss but this is not necessary in all cases.

Everbuild 102 Glazing Putty Official Information:

Everbuild 102 Putty 2kg Technical Data Sheet

Everbuild 102 Putty 2kg MSDS Safety Data Sheet

Everbuild 102 Manufacturer Page