Aquaseal Wet Room Waterproof Tanking Corner Tape 10m 683645 AQWRSTAPE10

Everbuild Aquaseal Corner Reinforcing Tanking Tape 1 x 10 meter Long Tape 683645 AQWRSTAPE10

Aquaseal Code: AQWRSTAPE10

Sika Code: 683645

Barcode: 5029347611170

Size: 1 x 10m Tape

Overview:

Everbuild Aquaseal Corner Reinforcing Tanking Tape is a 1 x 10 metre waterproof reinforcing tape designed for use within wet room and bathroom tanking systems. It is used to strengthen vulnerable areas such as internal corners, edges, joints, and weak points before tiling, helping to improve the durability of the waterproofing system. The flexible construction allows it to accommodate minor substrate movement while maintaining reinforcement where leaks are most likely to occur.

Suitable for use in wet rooms, bathrooms, shower enclosures, and other high-moisture areas, it can also be used on flat surfaces to reinforce weak areas such as around pipe entries when embedded into a compatible tanking membrane.

Key Features

• 10 metre roll for corner and joint reinforcement

• Designed for wet room and bathroom tanking systems

• Reinforces internal corners, edges, and junctions

• Flexible construction helps accommodate minor movement

• Helps strengthen vulnerable waterproofing areas

• Suitable for use in showers, bathrooms, and wet rooms

• Can be used on flat areas to reinforce weak points

• Easy to cut and position during installation

Specifications

• Brand: Everbuild Aquaseal

• Product Name: Corner Reinforcing Tanking Tape

• Aquaseal Code: AQWRSTAPE10

• Sika Code: 683645

• Barcode: 5029347611170

• Size: 1 x 10m Tape

• Type: Waterproof tanking reinforcing tape

• Primary Use: Reinforcing corners, joints, and weak areas in tanking systems

• Typical Areas: Wet rooms, bathrooms, shower enclosures, utility areas

Applications

• Reinforcing internal corners in wet rooms

• Reinforcing wall/floor junctions in shower areas

• Strengthening edges and joints in tanking systems

• Reinforcing weak areas before tiling

• Protecting vulnerable points in bathroom waterproofing

• Use on flat areas around pipe entries and penetrations

• Wet rooms, bathrooms, shower enclosures, utility rooms, and similar high-moisture areas

How to Use

• Ensure surfaces are clean, dry, sound, and free from dust, grease, and loose material.

• Apply the appropriate primer if required by the tanking system.

• Apply tanking membrane to the area in line with the membrane instructions.

• Position the tape into the wet membrane along corners, joints, or weak areas.

• Press/embed the tape fully to remove air pockets and ensure full contact.

• Apply additional membrane over the tape to fully cover and reinforce it.

• Allow the system to cure fully before tiling or applying finishes.

• Always follow the tanking membrane manufacturer’s installation guidance.

Everbuild Aquaseal Corner Reinforcing Tanking Tape 10m – Key FAQs

• What is this tape used for?
  It is used to reinforce corners, joints, and vulnerable areas within a wet room or bathroom tanking system before tiling.

• Is this a waterproofing membrane on its own?
  No, it is a reinforcing tape and should be used as part of a compatible tanking membrane system.

• Where is it commonly installed?
  It is commonly installed in internal corners, wall/floor junctions, shower areas, and other high-risk leak points.

• Can it be used on flat surfaces as well as corners?
  Yes, it can also be used on flat areas to reinforce weak spots, including around pipe entries and penetrations.

• Can I cut the tape to size?
  Yes, the tape can be cut to suit the required length and layout during installation.

• Is it suitable for wet rooms and shower enclosures?
  Yes, it is designed for use in wet rooms, bathrooms, and shower enclosures as part of a tanking system.

• Do I need primer before fitting the tape?
  Use primer where required by the tanking system or substrate. Always follow the membrane/primer instructions.

• Can tiles be fixed over it?
  Yes, once it is embedded and fully covered with tanking membrane and the system has cured, tiles can be installed over the area.

• What length is the roll?
  This product is supplied as 1 x 10 metre tape.

• Is it suitable for DIY use?
  Yes, it can be used by DIY users, but correct installation as part of a full tanking system is essential.

Important Notes

• Use as part of a compatible tanking membrane system – not as a standalone waterproofing product.

• Fully embed and cover the tape with membrane for correct performance.

• Prepare surfaces properly and follow primer/membrane instructions.

• Always read the latest Technical Data Sheet before first use to confirm suitability and application guidance.

• Browse the full range of Wet Room Bathroom Kits for compatible waterproofing products.

"Always read the Technical Datasheet prior to first use to ensure you have the correct information and  product for your application" All Wet Room Bathroom Kits