Everbuild Anchorset Green 150 Chemical Anchor Resin Styrene Free ANCHGREEN150

Everbuild Anchorset Green 150 Chemical Anchor Resin Styrene Free

MPN: 490165

Model: ANCHGREEN150

Barcode: 5029347606503

Size: 150ml Fits Standard Heavy Duty Sealant Gun 310ml to 400ml

Overview:

Everbuild Anchorset Green 150 is a styrene-free chemical anchor resin designed for secure fixing of studs, bolts, threaded rods, and similar fixings into concrete, brick, masonry, and stone. Supplied in a 150ml cartridge, it is easy to dispense using a standard heavy-duty sealant gun (310ml to 400ml compatible).

The low-odour styrene-free formula makes it suitable for indoor and outdoor use, while its high-strength bond provides reliable anchoring for both trade and DIY projects. It is also a good choice for close-to-edge applications, as chemical anchoring places less expansion stress on the surrounding substrate than many mechanical anchors. 

Key Features

• Styrene-free formula with lower odour

• High-strength chemical anchoring for secure fixings

• Suitable for concrete, brick, masonry, and stone

• Ideal for close-to-edge applications

• 150ml cartridge for smaller jobs and one-off installations

• Compatible with standard heavy-duty sealant guns (310ml to 400ml)

• Suitable for indoor and outdoor use

• Reliable anchoring for trade and DIY applications

Specifications

• Brand: Everbuild

• Product Name: Anchorset Green 150 Chemical Anchor Resin

• MPN: ANCHGREEN150

• Sika Code: 490165

• Barcode: 5029347606503

• Size: 150ml

• Type: Chemical anchor resin

• Formula: Styrene free

• Colour Range: Green system / mixed through nozzle to uniform colour before use

• Gun Compatibility: Fits standard heavy-duty sealant gun (310ml to 400ml)

• Suitable Substrates: Concrete, brick, masonry, stone

• Use Area: Internal and external applications

Typical Applications

• Anchoring threaded rods, studs, and bolts into masonry substrates

• Securing heavy-duty fixings in concrete and brickwork

• Close-to-edge fixing applications where reduced substrate stress is beneficial

• Installing railings, brackets, supports, and exterior fittings

• General construction, renovation, and repair anchoring jobs

• DIY and professional fixing applications

How to Use Anchorset 150

• Drill the hole to the required size and clean it thoroughly, removing dust and debris.

• Can be used in a standard good Quality Sealant Gun such as a HD PRO Sealant Gun, attach the mixing nozzle 

• Dispense a small amount first and discard until the resin colour is uniform.

• Fill the hole from the base, withdrawing the nozzle slowly as the hole fills (typically around two-thirds full).

• Insert the fixing with a twisting motion to ensure full contact with the resin.

• Allow the resin to cure fully before applying load, following manufacturer curing guidance for temperature conditions.

Everbuild Anchorset Green 150 – Key FAQs

• What is Everbuild Anchorset Green 150 used for?
  It is used for chemically anchoring studs, bolts, threaded rods, and similar fixings into concrete, brick, masonry, and stone.

• Is this resin styrene free?
  Yes, Anchorset Green 150 is a styrene-free formula, which helps provide a lower odour and makes it more suitable for enclosed spaces.

• Can it be used outdoors?
  Yes, it is suitable for both indoor and outdoor anchoring applications when used correctly.

• Do I need a special gun to use this cartridge?
  It is designed to fit a standard heavy-duty sealant gun compatible with 310ml to 400ml cartridges.

• Why is it suitable for close-to-edge fixings?
  Chemical anchoring does not create the same expansion pressure as many mechanical anchors, helping reduce stress on the surrounding substrate.

• What substrates can it be used in?
  It bonds to common construction materials including concrete, brick, masonry, and stone.

• Can I use it for heavy-duty fixings?
  Yes, it is suitable for high-strength anchoring applications, provided the correct fixing size, hole preparation, and curing time are followed.

• Why must I discard the first resin from the nozzle?
  The first material may not be fully mixed. Always dispense until the resin is a uniform colour before filling the hole.

• How long does it take to cure?
  Cure time depends on temperature and site conditions. Always allow full curing before loading the fixing.

• Is this suitable for DIY use?
  Yes, it is suitable for DIY and professional users, especially for secure fixing jobs where a strong anchor is needed.

Important Notes

• Use a mixing nozzle and discard the first dispensed material until the resin colour is uniform.

• Clean drilled holes thoroughly before application for best performance.

• Do not apply load until the resin has fully cured.

• Curing time varies with temperature and conditions.

• "Always read the Anchorset 150 Technical Datasheet prior to first use to ensure you have the correct information and  product for your application"

Take a look at the full range of Chemical Anchor Fixings to go along with your Adhesive