Everbuild 702 Aqua Plus Water Resistant Tile Adhesive 10 Litre 16kg RES10

Everbuild 702 Aqua Plus Tile Adhesive 10 Litre 16kg

Barcode 5029347070205

Sika Code 487072

MPN RES10

Everbuild 702 Aqua Plus ready mixed buff adhesive paste for securing ceramic wall tiles and mosaics to most interior wall surfaces.

Ideal for use in interior wet areas showers bathrooms wet rooms and areas subject to lots of washing down and areas of high humidity.

Blend of limestone fillers, clays and styrene acrylate polymers with minor additives.

Available in 2 Sizes

MPN RES10 - 16kg 10 Litre

MPN RES05 - 7.5kg 5 Litre

Everbuild 702 Water Resistant Tile Adhesive Benefits and Areas of Use:

• Excellent water resistance.
• Extremely high bond strength over double the minimum requirement in wet shear test 7 days drying, 7 days water immersion followed by shearing whilst wet.
• Ready mixed formula no mixing, no powder dust and mess from mixing apply straight from the tub.
• Suitable for kitchens bathrooms wet rooms and other wet areas.
  
• Easier to apply than most competitive adhesives.
• Excellent non slip characteristics and extended open time.
  
• No movement on a 300 x 200 standard large format wall tile.
• Shower areas when used in conjunction with EVERBUILD 730 POWDERED WALL TILE GROUT.
• Suitable for communal and power showers Work tops subject to water contact.

How to use Everbuild 702 Water resistant Tile Adhesive:

1. Surfaces to be tiled must be clean, dry and sound.
2. Apply adhesive to wall at a depth of 3-6 mm no less than 3 mm, no greater than 6 mm combing out an area of no greater than 1 m2 at a time.
3. In dry situations, use a suitable notched trowel across the surface of the adhesive before placing the tiles into position and securing with a slight twist action to remove air voids.
4. In areas subject to wet conditions, do not use a notched trowel, bed the tiles directly into the surface of the adhesive and, again, secure with a slight twist action.
5. In both situations, it is good practice to periodically remove a tile and check that at least 75 % of the tile is covered in adhesive, if this is not the case, apply fresh adhesive and re-position.

Everbuild RES10 Data Sheets:

Everbuild 702 Technical Data Sheet

Everbuild 702 MSDS Safety Data Sheet

Everbuild 702 Water Resistant Tile Adhesive DOP

Everbuild Manufacturer 702 Product Page