Dekton Soldering Solder Remover Cleaner DT60940

Dekton DT60940 Soldering Solder Remover Cleaner

Barcode: 5055441408118

MPN: DT60940

Overview:

Dekton Soldering Solder Remover Cleaner – Model DT60940, is an essential tool for anyone involved in soldering tasks, from electronics repair to DIY projects. a practical desoldering wick designed to lift molten solder from joints quickly and cleanly. With a 2.5mm braid width and 1.5m length, it’s ideal for electronics repair, rework and maintenance, helping you clear excess solder from circuit boards and components without heavy scraping or damage. Used with a soldering iron, the braid absorbs solder from the joint, leaving a cleaner pad and a neater finish ready for re-soldering, component replacement or modification work. Compact and easy to handle, it’s a useful addition to any electronics toolkit for DIY users, hobbyists and trade repairs.

Key Features

• De-soldering wick designed to absorb and remove molten solder

• Helps clean joints and pads ready for re-soldering and rework

• 2.5mm braid width for controlled solder removal

• 1.5m length provides multiple uses from one roll

• Simple to use with a standard soldering iron

• Ideal for PCB repairs, modifications and component replacement

• Lightweight and compact for toolboxes and on-site kits

Specifications

• Brand: Dekton

• MPN: DT60940

• Product Type: Solder remover / desoldering wick (braid)

• Width: 2.5mm

• Length: 1.5m

• Use: Electronics solder removal and joint cleaning

Applications

• Removing excess solder from PCB joints during repair work

• Clearing solder to replace or reposition components

• Fixing solder bridges and improving joint appearance

• Electronics hobby projects and DIY builds

• Educational use for soldering and desoldering practice

How to Use

• Place the wick over the solder joint you want to clean

• Press a heated soldering iron tip onto the wick above the joint

• Allow the solder to melt and be absorbed into the braid

• Lift the wick away once the solder has flowed into it

• Cut off the used section and repeat as needed

• Let the area cool before inspecting and re-soldering

Dekton DT60940 Solder Remover Cleaner – Key FAQs

• What is this product used for?
  It’s a de-soldering wick used to remove molten solder from joints on circuit boards and components, helping clean pads ready for re-soldering.

• How does a solder wick work?
  When heated with a soldering iron, the braid absorbs molten solder from the joint, lifting it away to leave a cleaner connection point.

• What size is the wick?
  The braid is 2.5mm wide and supplied in a 1.5 metre length.

• Is it suitable for electronics and PCBs?
  Yes, it’s designed for electronics repair and rework, helping remove solder without aggressive scraping that could damage delicate pads.

• Can it help remove solder bridges?
  Yes, it’s useful for clearing excess solder and removing bridges between pads on circuit boards.

• Do I need any extra materials to use it?
  You only need a soldering iron. For easier flow, many users also apply a small amount of flux, depending on the job.

• Can it be reused?
  The used section becomes filled with solder, so you typically cut off the used portion and continue with a fresh section.

• What should I do after using it?
  Let the board cool, inspect the joint area, then re-solder or fit the replacement component as required.

All Electrical Tools and Consumables.