Defender RCD Safety Electric Circuit Breaker 13 amp Wire On Plug Adapter
MPN: E11070C
Barcode: 5055056972004
Overview:
The Defender RCD Safety Electric Circuit Breaker 13A Wire-On Plug Adapter E11070C is designed as a permanent safety upgrade for power tools, extension leads and outdoor equipment. Wired directly onto the cable in place of a standard plug, it continuously monitors the supply and cuts power in approximately 40 milliseconds if a fault or imbalance is detected, helping to reduce the risk of serious electric shock.
Ideal for high-risk environments such as workshops, garages, gardens and site use, this robust RCD plug offers simple, effective extra protection whenever you plug in.
Key Features
13A wire-on RCD plug for permanent installation to tools or extension leads
Continuously monitors live/neutral and trips in around 40ms on fault detection
Helps reduce the risk of electric shock from damaged or wet equipment
Impact-resistant housing built to withstand on-site and DIY use
Test and reset buttons to verify operation and restore power safely
Suitable for most 230V portable tools and appliances (excluding pond equipment when out of water)
Specifications
Brand: Defender
Product Type: Wire-on RCD safety plug
MPN: E11070C
Barcode: 5055056972004
Rating: 13A, 230V AC (typical UK mains)
Trip Time: Approx. 40ms under fault/imbalance (typical)
Body: Robust, impact-resistant plastic housing
Fitting: Wire-on UK 13A plug to be fitted to cable
Functions: Test and reset buttons
Typical Applications
Permanent protection on:
Extension leads for garden and site use
Power tools such as drills, saws, sanders and grinders
Garden equipment like lawnmowers, hedge trimmers and pressure washers
Extra safety on older installations without RCD-protected sockets
General DIY or trade environments where cables and tools are more likely to suffer damage
How to Use
Have the plug wired by a competent person in accordance with current electrical regulations.
Connect the live, neutral and earth conductors to the clearly marked terminals.
After wiring, plug into a suitable 13A socket and press RESET to make the unit live.
Press the TEST button to confirm it trips correctly, then press RESET again before use.
If the RCD trips in use, investigate and correct the fault before resetting and re-using.
Important: Not suitable as the sole protection for pond pumps or other pond equipment. While the equipment is submerged it may be protected; once removed from the water, the installation is no longer adequately protected and a properly RCD-protected supply should be used.
Defender Wire-On RCD Plug – Key FAQs
Does this RCD plug just plug in, or does it need wiring?
This is a wire-on RCD plug and must be wired to the cable of a tool or extension lead by a competent person. It is not a simple plug-through adapter.
How does this help protect me from electric shock?
It monitors the current balance between live and neutral and cuts power in around 40ms if an imbalance is detected, helping to reduce the risk of serious shock in fault conditions.
Can I use it outdoors?
Yes, it is ideal for outdoor-rated tools and leads, but the plug and socket must be kept dry and used with suitable weather-protected equipment.
Is it suitable for pond pumps?
It should not be relied on as the only protection for pond equipment. Pond installations should be protected by a fixed RCD at the consumer unit or suitable outdoor RCD spur.
How often should I test the RCD?
Press the TEST button before first use and then at regular intervals (for example monthly). It should trip immediately; press RESET to restore power once you’ve confirmed correct operation.
"Appliances can become dangerous if the wiring becomes loose, or
their power cords become damaged or if they get wet. Not only power
tools and lawnmowers can cause electrocution is also possible if
fingers, wet hair or other conductive bodies enter the appliance. In all
these cases the Defender safety RCD is a must have life saving device
for only a few pounds."
| Data | |
| Manufacturer | Defender |
| Reference Code | E11070C |
| Type | Wire On RCD electric Breaker |
| Power | 13 amp |
| Quantity | 1 |
| Special Features | Tripping Speed 40ms, RCD Rating 30ma |
| Voltage | 240 volt |