Dickie Dyer 976341 Plumbers PTFE Gas Fitters Tape - Pack of 10

Dickie Dyer 976341 Premium Plumbers PTFE Gas Fitters Tape - Pack of 10

MPN: 976341

Barcode: 5024763190018

Overview:

Dickie Dyer Plumbers PTFE Gas Fitters Tape Pack of 10 976341 is a gas-grade PTFE thread seal tape designed for sealing threaded joints on natural gas, LPG and town gas pipework. Supplied as ten 12mm x 5m rolls, it is thicker than standard PTFE tape to provide reliable sealing on critical gas fittings. Ideal for gas engineers, plumbers and heating installers, this handy bulk pack helps prevent leaks on threaded metal joints while also lubricating threads for easier assembly and disassembly. Can also be used for water applications.

Key Features

• Gas-grade PTFE thread seal tape for natural gas, LPG and town gas

• Thicker profile compared with standard PTFE for improved sealing

• Each roll approx. 12mm wide x 5m long

• Suitable for metal threaded fittings and connections

• Provides a gas-tight seal when applied correctly

• Lubricates threads to aid assembly and later disassembly

• Resistant to gas, oils and common installation fluids

• Supplied as a cost-effective pack of 10 rolls for trade use

Specifications

• Brand: Dickie Dyer

• Product Name: Plumbers PTFE Gas Fitters Tape

• MPN: 976341

• Roll Dimensions: 12mm width x 5m length (approx.)

• Pack Quantity: 10 rolls

• Material: PTFE (polytetrafluoroethylene)

• Grade: Gas fitters tape (gas-grade PTFE)

• Suitable Media: Natural gas, LPG, town gas (on threaded fittings)

• Typical Use: Gas pipework, appliances and associated fittings

Applications

• Sealing threaded joints on natural gas and LPG installations

• Boiler, fire and cooker threaded connections (where PTFE is specified)

• Gas meter unions, isolation valves and associated fittings

• General heating and gas pipework using threaded metal fittings

• Maintenance work on existing gas systems requiring re-sealing of threads

How to Use

• Safely isolate the gas supply and depressurise the system before starting work.

• Clean the male threads thoroughly to remove old tape, paste, oil and debris.

• Wrap the PTFE tape tightly around the threads in the direction of tightening, overlapping each turn by about half the tape width.

• Apply an appropriate number of wraps to build an even layer, following current regulations or company practice for gas joints.

• Assemble and tighten the fitting to a firm, secure position without over-tightening.

• Test the joint for leaks using an approved leak detection method before putting the system back into service.

Dickie Dyer Plumbers PTFE Gas Fitters Tape Pack of 10 976341 – Key FAQs

• Is this PTFE tape suitable for gas installations?
  Yes, this is gas-grade PTFE tape intended for sealing threaded joints on natural gas, LPG and town gas systems when PTFE is permitted by current regulations.

• What size are the individual rolls?
  Each roll is approximately 12mm wide and 5m long, giving enough tape for multiple joints depending on how many wraps you use per connection.

• How many rolls do I get in the pack?
  This product is supplied as a pack of 10 rolls, making it ideal for regular trade use or keeping stocked in the van.

• Can I use this tape on water fittings as well?
  It is designed for gas work. the tape can also be used for potable water or general plumbing.

• What kind of threads can I use this on?
  It is suitable for use on metal threaded joints commonly found on gas pipework and appliances, including tapered and parallel threads where PTFE tape is specified.

• Does this tape help with dismantling joints later?
  Yes, as well as sealing, the PTFE lubricates the threads, which can make disassembly easier during future maintenance or appliance replacement.