Dewalt Inox Metal Stainless Steel Cutting Disc 115mm x 1.2 10pk DT42335TZ

Dewalt Inox Metal Stainless Steel Cutting Disc 115mm x 1.2 10pk DEWDT42335TZ-QZ

Supplied in a Metal Storage Container

Barcode: 5035048540893

MPN: DT42335TZ-QZ

Size: 115mm Diameter, 1.2mm Thick, 22.23mm Bore.

Quantity: Pack of 10

Product Overview:

This DeWalt 115mm Inox Metal Cutting Disc Set DT42335TZ-QZ provides a pack of thin, fast-cutting discs ideal for stainless steel and general metalwork. Each 115mm disc has a 1.2mm cutting profile, helping to produce smooth, accurate cuts with reduced burrs and less material waste.

Designed for use with standard 115mm angle grinders, these discs are suitable for stainless steel, steel and compatible composite materials. Supplied as a 10-piece set in a sturdy metal storage tin, they are easy to transport, keep organised and protect from damage between jobs in the workshop or on site.

Key Features

• Thin 1.2mm cutting edge for clean, precise cuts and low waste

• Suitable for stainless steel, mild steel and compatible composite materials

• 115mm diameter discs to fit common 4 1/2" angle grinders

• Low-dust design helps maintain a cleaner work area when cutting

• 22mm bore for standard 115mm grinder fitment

• Supplied as a pack of 10 discs for ongoing use

• Protective metal storage tin for safe, convenient transport and storage

Specifications

• Brand: DeWalt

• Product Type: Inox metal cutting discs

• MPN: DT42335TZ-QZ

• Barcode: 5035048540893

• Disc Diameter: 115mm (4 1/2")

• Disc Thickness: 1.2mm (approx.)

• Bore Size: 22mm

• Material Type: Inox, suitable for stainless steel and metal

• Pack Quantity: 10 cutting discs

• Storage: Supplied in metal storage container

Applications

• Cutting stainless steel tube, bar, section and sheet

• Trimming mild steel angle, box section and flat bar

• Fabrication work in workshops and on construction sites

• Cutting light metal components for vehicle or machinery repair

• General metalworking, maintenance and installation tasks

• Use by fabricators, engineers, fitters and DIY users with suitable grinders

How to Use

• Check that the disc specification, size and speed rating are compatible with your angle grinder before fitting

• Isolate the grinder from the power supply and fit the disc securely according to the tool manufacturer’s instructions

• Always wear appropriate PPE, including safety glasses, gloves, hearing protection and suitable clothing

• Allow the disc to reach full speed, then apply steady, even pressure to the workpiece without forcing the cut

• After use, allow the disc to stop fully before setting the grinder down and store spare discs safely in the metal tin in a dry location

Dewalt Inox Cutting Discs – Key FAQs

• Can these discs be used on stainless steel?
    Yes, they are designed for cutting stainless steel and are also suitable for many general metal cutting tasks when used with a compatible angle grinder.

• How thick are the discs in this set?
    Each disc has an approximate thickness of 1.2mm, which helps provide a fine, clean fast cut with reduced waste compared to thicker discs.

• Do they fit standard 115mm angle grinders?
    Yes, the discs are 115mm in diameter with a 22mm bore, making them suitable for most standard 4 1/2" and 5 inch grinders that accept this bore size.

• Are these discs suitable for non-metal materials?
    They are primarily intended for stainless steel and metal, but can also be used on some compatible composite materials, fiberglass and more where cutting discs of this type are recommended.

• Is storage included with the pack?
    Yes, the 10 discs are supplied in a protective metal tin, which helps keep them organised and protected from damage and moisture.

• How should I store unused discs?
    Keep them in the supplied tin in a dry place away from impacts and excessive moisture, and always check discs for damage before use.

Explore our full range of metal cutting discs and angle grinder accessories for more options to suit your cutting and fabrication work.