Silverline Electric Drill Plaster Screed Mixer Mixing Paddle 868535

Silverline Electric Drill Plaster Screed Heavy Duty Mixer Mixing Paddle

Barcode: 5055058111593

MPN: 868535

Overview:

The 868535 Electric Drill Plaster Screed Heavy Duty Mixer Mixing Paddle multi-purpose paddle designed for mixing a wide range of building and decorating materials with an electric drill or mixing machine. Featuring a 10mm hex shaft for secure grip in the chuck, it helps deliver consistent mixing for products such as thin-set adhesive, self-levelling compounds, cement slurries, plaster, screed, artex, paint and paste-type materials. With a large 140mm head and 600mm length, it’s ideal for mixing in buckets and tubs while keeping the drill clear of the mix. Built for heavy-duty use, it’s designed to run at lower speeds for better control and reduced splash.

Key Features

• Heavy-duty mixing paddle for drills and mixing machines

• 10mm hex shaft for secure drive and reduced slip

• Large 140mm paddle head for efficient mixing

• Suitable for cement-based products, plaster and screeds

• Also ideal for self-levelling compounds, thin-set, paint and slurries

• Designed for controlled, low-speed mixing

• Requires a 10mm or larger drill chuck

Specifications

• Brand: Silverline

• MPN: 868535

• Barcode: 5055058111593

• Product Type: Mixing paddle / drill mixer attachment

• Size: 140mm x 600mm

• Connector / Shaft: 10mm hex

• Chuck Requirement: 10mm or larger

• Max Speed: 500rpm

• Finish: Painted

• Duty Rating: Heavy duty

Applications

• Mixing plaster, screed and artex

• Cement slurries and cement-based mixes

• Thin-set adhesive and bonding products

• Self-levelling compounds

• Paint, paste and similar materials

How to Use

• Fit the 10mm hex shaft into a 10mm+ chuck and tighten securely

• Use a drill/mixer with suitable torque and start at low speed

• Keep the paddle head submerged to reduce splashing

• Mix steadily, moving the paddle around the bucket for an even blend

• Do not exceed 500rpm for safer, more controlled mixing

• Clean the paddle immediately after use before material sets

Mixing Paddle 868535 – Key FAQs

• What size chuck do I need?
  You need a 10mm or larger chuck to accept the 10mm hex shaft.

• What materials can I mix with it?
  It’s suitable for plaster, screeds, artex, cement slurries, thin-set, self-levelling compounds, paint and other similar mixes.

• What is the maximum speed?
  The recommended maximum speed is 500rpm. Lower speeds usually give better control and less splash.

• Will it work in a standard drill?
  Yes, as long as the drill has a 10mm+ chuck and enough torque for the material you’re mixing. A mixing drill is ideal for heavier products.

• Why use a hex shaft?
  A hex shaft helps reduce slipping in the chuck, giving a more secure drive when mixing thicker materials.

• How do I keep clean-up easy?
  Rinse and wipe the paddle straight after use—once plaster or cement products set, they’re much harder to remove.