Alpha Chem Hard Surface Floor Defence Protector 25m X6DFENDH25

Alpha Chem Hard Surface Floor Defence Protector 25m X6DFENDH25

From Cromar

Barcode: 5036684020701

MPN: X6DFENDH25

Overview:

Alpha Chem Hard Surface Floor Defence Protector is a contractors-grade, self-adhesive protection film supplied on a 25 metre roll. Designed to shield hard surfaces from dirt, dust, paint splashes, spills and general site mess, it’s ideal for decorating, DIY and building work in homes and commercial spaces.

Clear in colour and reverse-wound for easy application, it adheres directly to most common hard surfaces and can be left in place for up to 28 days before being cleanly removed, helping to prevent costly damage and time-consuming clean-ups.

Key Features

• Self-adhesive hard surface protector for decorating, DIY and building work

• Suitable for timber, hardwood, ceramic tiles, vinyl, laminate, stone and metal

• Also protects worktops, window sills, doors, kitchen units and glass

• Totally waterproof – helps protect against paint and liquid spillages

• Reverse-wound roll for quick, easy application without an applicator

• Safer alternative to loose dust sheets with reduced trip hazards

• Can be left down for up to approximately 28 days in normal conditions

• Removes easily without leaving a sticky residue when used as directed

Specifications

• Brand: Alpha Chem (Cromar)

• Product Type: Self-adhesive hard surface protection film

• MPN: X6DFENDH25

• Barcode: 5036684020701

• Roll Length: 25 metres

• Roll Width: 600mm

• Thickness: Approx. 50 micron

• Colour: Clear

• Use Duration: Up to 28 days (approx. 4 weeks)

• Suitable Surfaces: Hard floors and other hard surfaces (not carpets)

Applications

• Protecting hard floors during painting and decorating

• Safeguarding timber, laminate, vinyl and tiled floors on refurbishment jobs

• Covering stone, concrete and other hard surfaces on building sites

• Protecting kitchen worktops, window sills, doors and units from splashes and scuffs

• Short-term protection in hallways and access routes while trades are working

How to Use

• Ensure all surfaces are hard, sound, clean, dry and free from dust, oil, solvents and other contaminants.

• Unwrap the roll, pull out a short length and place it sticky side down on the surface to be protected.

• Press down firmly, then continue to unwind and smooth the film as you go, ensuring good adhesion and avoiding trapped air.

• Cut the film neatly at the edge of the area using a suitable knife or scissors, overlapping adjacent runs slightly if needed.

• Remove Floor Defence within 28 days of application by peeling back slowly and disposing of the film responsibly.

Limitations & Guidance

• Hard surfaces only – not suitable for carpets or soft floor coverings.

• Remove after a maximum of 4 weeks to minimise any risk of residue.

• In heavily trafficked areas or at high temperatures it may need to be removed sooner.

• Avoid use over active underfloor heating while the product is in place unless for a short period of a day or less

• Always test on a small, inconspicuous area first if you are unsure about compatibility.