Bond It Cover it Carpet Floor Protector 50m Defender BDCICP50

Bond It Cover-it Carpet Floor Protector 50 Meter Plastic Textile Defender On A Roll

MPN BDCICP50

Barcode 5060021369857

Alpha Chem 50 meter long self adhesive carpet protector 50 meters of reverse wound plastic protection film.

Cover It carpet and textile protector is a clear multi-purpose, contractors grade, self adhesive floor protector that's waterproof protects against expensive to clean spillages on carpets.

A high performance, self‐adhesive protection material for covering and protecting synthetic carpets and other textiles such as sofas against mess, dirt, spillages and staining, etc. whilst painting and decorating, plastering, tiling and general building and maintenance projects undertaken in the home and the work site.

Safer than traditional dust sheets as there are no trip hazard risk, the perfect partner for any decorating, DIY or building work.

Will not creep and wrinkle after application, Stays where it is put.

Due to the adhesive being reverse wound, is easy to apply with minimum effort simply roll out and firm down with the palm of your hand.

Bond it carpet protector can be left down for up to 4 weeks, and it is easily removed once a job is finished, leaving no adhesive residue behind.

Cover it 50 meter high performance Carpet Floor Defence Protector also perfect to protect your carpets against Party Spills.

Ideal for protecting against mess, dirt, staining, spillages and soiling that occurs during painting and Building Work.

The carpet defender is ideal for protecting stair carpets and all other carpets around the house office and workplace.

Can be used for commercial and domestic applications.

Important Product info

Tear resistant can be used in at temperatures between +15 degrees C to +25 degrees C.

This product is for application to carpets, DO NOT use on hard surfaces use Hard Surface Protector

Obviously adhesion will be reduced on dusty surfaces vacuuming prior to use is recommended.

must be removed after a maximum of 4 weeks to prevent a sticky residue being left.

In heavily trafficked areas or where air temperature is high remove after 1 week to 2 weeks.

Do not use underfloor heating whilst product is in situ this will reduce the time that the film can stay down.

Carpets newly laid using adhesive will require 72 hours for the vapours to dissipate before application of COVER-IT protective film

COVER-IT will not adhere to damp or wet textiles such as recently cleaned carpets.

Also Available Bond It Cover-it Carpet Protector in 25 Meter Roll

Directions

1. Ensure all surfaces are clean, sound, dry and free from dust, oil, solvents or other chemicals.
2. Simply unwrap the roll, pull out a short length and place sticky side down on the surface to protect.
3. Unwind the roll, ensuring adhesion to the surface as you go, and cut off the product with a safety knife or a film safety slitter when the edge of the surface is reached.
4. The film can be pushed out using a soft broom or firmed with the palm of your hand.

Take care to remove within 30 days in normal temperatures

Always read the technical data sheet that can be downloaded in pdf form from the downloads tab of this product