Toupret Airless All in One Spray Plaster 25kg Bag TTAIRR25GB 40 Bag Pallet

Toupret Airless All-in-One Spray Plaster 25kg Bag TTAIRR25GB 40 Bag Pallet

MPN: TTAIRR25GB

Barcode: 3178310021194

Size: 40 x 25kg bags (1000kg pallet)

Weight: 25kg per bag

Overview:

Toupret Airless All-in-One Spray Plaster (40 x 25kg Bag) - a professional-grade, ready-to-use interior plaster for large-scale wall and ceiling work. Each 25kg bag goes directly into your airless machine, with no mixing or priming at any stage.

With a coverage rate of 1.7kg/m² per millimetre of thickness, a full pallet covers substantial areas - rendering it a practical bulk option for fit-out contracts, new-build sites, and multi-room renovation projects. The high-build formula delivers up to 5mm in a single pass, reducing the number of coats required per room.

After drying, the plaster accepts paint, filler, or wall coverings across the full range of treated interior surfaces. All application equipment cleans with water, keeping the site clear-up straightforward.

Key Features and Benefits

• Bulk pallet supply: 40 x 25kg bags - 1000kg total - for high-volume projects.
• Ready to use: No mixing at any stage - load straight from the bag and spray.
• High-build formula: Achieves up to 5mm per coat in a single application.
• One coat levelling and finishing: Levels and fine finishes in a single pass where conditions allow.
• Extra fine surface finish: Leaves a smooth, refined result after spraying and skimming.
• No primer or sealer required: Adheres directly to the substrate on first contact.
• Coverage rate: 1.7kg/m² per millimetre - straightforward to calculate quantities for large jobs.
• Short overcoat window: Paint or decorate after 24 to 48 hours once fully dry.
• Painted and unpainted substrate compatibility: Works on new and renovated surfaces without pre-treatment.
• Interior use only: Suitable for walls and ceilings in internal environments.
• Water clean-up: Machinery and tools are easily cleaned with water at the end of each session.
• 12-month product guarantee: Guaranteed from purchase date under correct storage conditions.

Typical Applications

• High-volume interior wall levelling on commercial fit-out projects
• New-build plastering across multiple rooms or floors
• Fine finishing of plasterboard and drywall in residential developments
• Bulk resurfacing of cement and concrete interior walls
• Renovation of old painted surfaces across large housing schemes
• Plastering contractor supply for ongoing site programmes
• Large-scale ceiling finishing before decoration

How to Use

• Machine Set-Up: Strip the airless gun of all filters - strainer, suction, and pencil - to allow the product to flow freely. Run the machine in water to prime it before use.

• Loading the Hopper: Transfer plaster from the 25kg bag into your bucket or hopper as required. No mixing is needed at this stage.

• Nozzle Selection: Fit a nozzle appropriate for spray plasters - sizes 5.31, 5.35, 6.31, or 6.35 are recommended. Check the technical datasheet for full specifications before starting.

• Spraying: Position yourself 0.7 to 1m from the wall or ceiling. Hold the gun at a constant 90° angle and move in steady, parallel passes. Overlap each pass by 50% and cover one square metre at a time. Where ceilings and walls both require finishing, spray the ceilings first.

• Skimming: Immediately after spraying each section, skim with a blade or trowel of at least 50cm. Apply a follow-up coat once the first is hard and dry to the touch, if additional build or coverage is needed.

• Drying and Finishing: Leave to dry fully before sanding to the required finish. Do not overcoat until the surface is completely dry.

Frequently Asked Questions (FAQs)

• How much area does a full 1000kg pallet of this spray plaster cover?
  At a coverage rate of 1.7kg/m² per millimetre of thickness, a 1000kg pallet covers approximately 588m² at 1mm. For greater build thickness, divide the total weight by your intended application depth to calculate the area.

• Which substrates can this plaster be applied to without priming?
  It adheres without primer to gypsum, plasterboard, drywall, cement, concrete, cellular concrete, and old painted surfaces - whether the substrate is new or previously renovated.

• What are the site conditions required for application?
  Ambient temperature must be between +8°C and +35°C, and relative humidity must stay below 70%. Do not spray onto damp, overheated, or exterior surfaces, and avoid polystyrene and wallpaper substrates.

• Is a second coat always needed?
  Not always. A single coat is often sufficient when applied at the correct thickness. A second coat can be added as soon as the first coat is firm and dry to the touch, where additional build is required.

• How should pallet stock be stored on site?
  Keep bags in their original sealed packaging throughout storage. Store away from direct sunlight and frost, at a temperature between 0°C and 30°C. The product carries a 12-month guarantee from purchase under these conditions.

Summary

The Toupret Airless All-in-One Spray Plaster (40 x 25kg Bag) provides 1000kg of professional interior spray plaster for trade and contractor use. Ready to apply without mixing or priming, it finishes interior walls and ceilings to a high-build, extra fine standard across a wide range of substrates. Stock is guaranteed for 12 months from purchase when stored in original sealed packaging, away from sunlight and frost.

"Always read the Toupret Airless All-in-One Spray Plaster (40 x 25kg Bag Pallet) Technical Datasheet before starting work to confirm you have the right product and application details for your project."