Polycell Maximum Strength Paint and Varnish Stripper 500ml

Polycell Maximum Strength Paint and Varnish Multi Layer Stripper 500ml

Barcode: 5010212558454

Option: 500ml

Code: 5121862

Overview:
Polycell Maximum Strength Paint and Varnish Multi Layer Stripper 500ml is a fast, effective way to remove built-up layers of paint and varnish without unnecessary scraping or aggressive sanding. The powerful gel formula penetrates through multiple layers, lifting the coating into a softened film that’s easier to remove, leaving the surface ready for re-finishing. Suitable for most solvent and water-based paints and varnishes on wood and metal, it can be used both indoors and outdoors. The non-drip gel consistency makes it especially useful on doors, frames and other vertical surfaces where a thinner stripper may run.

Key Features

• Strips up to 12 layers of paint in one application (paint type dependent)

• Starts working from around 20 minutes

• Can be left on the surface for up to 4 hours if required

• Non-drip gel helps it stay in place on vertical surfaces

• Suitable for many solvent and water-based paints and varnishes

• For use on wood and metal

• Suitable for interior and exterior use

Specifications

• Brand: Polycell

• Product Type: Paint and varnish multi-layer stripper (gel)

• Size/Option: 500ml

• Code: 5121862

• Barcode: 5010212558454

• Coverage: Approx. 0.8m² per 500ml (varies with coating thickness)

• Working Time: From 20 minutes, up to 4 hours (as needed)

• Finish/Consistency: Non-drip gel

Applications

• Removing multiple layers of paint from wood and metal

• Stripping varnish prior to re-staining or repainting

• Doors, skirting, frames and furniture (test first)

• Outdoor metalwork and timber (follow safety guidance)

• Vertical surfaces where a gel is easier to control

How to Use

• Protect surrounding areas and wear suitable PPE (gloves/eye protection)

• Apply a generous, even coat to the painted/varnished surface

• Leave to work (typically from 20 minutes; longer for heavier build-ups)

• Once the coating lifts/softens, scrape off carefully with a suitable scraper

• Repeat if necessary for stubborn or very old coatings

• Clean and prepare the surface fully before repainting or finishing

Polycell Video Demonstration Guide:

Polycell Maximum Strength Paint & Varnish Stripper – Key FAQs

• How many layers can it remove?
  It can strip up to 12 layers in one go, depending on the type and age of the paint/varnish and how it was applied.

• How quickly does it work?
  It can start working in around 20 minutes, but thicker or older coatings may need longer. It can be left for up to 4 hours if required.

• Is it suitable for vertical surfaces?
  Yes, the non-drip gel formula is designed to cling to vertical areas like doors and frames for easier stripping.

• What surfaces can I use it on?
  It’s suitable for stripping many paints and varnishes on wood and metal. Always test a small area first, especially on delicate finishes.

• Can it be used indoors?
  Yes, it can be used indoors and outdoors, but always ensure good ventilation and follow the safety guidance on the label.

• What’s the coverage per 500ml?
  Coverage is approximately 0.8m² per 500ml, but this varies depending on how thick the paint layers are and the surface texture.

• Will it remove every type of paint?
  It works well on most household paints and varnishes, but some specialist coatings (for example certain wheel paints) may be more resistant and may require extra effort or repeat applications.

• What should I do after stripping before repainting?
  Remove all residues, allow the surface to dry fully, then sand lightly if needed and prime/finish as appropriate for the substrate and paint system.

Todays paint strippers will work fine on most houshold paints and varnishes used today but there exceptions such as some wheel paints, these sometimes need a specialist dipping company that use very harsh chemicals not available to the public for obvious reasons.