Everbuild Anchorset Green 300 Chemical Anchor Resin Styrene Free 482457 ANCHGREEN

Everbuild Anchorset Green 300 Styrene Free 300ml Cartridge 482457 ANCHGREEN

Barcode: 5029347606046

MPN: ANCHGREEN

Sika Code: 482457

Size: 300ml Fits Standard Heavy Duty Sealant Gun 310ml to 400ml

Overview:

Everbuild Anchorset Green 300 is a styrene-free chemical anchor resin supplied in a 300ml standard cartridge for high-strength anchoring and fixing in concrete, brickwork, and masonry. Designed for secure installation of threaded rods, bolts, rebar, and similar fixings, it provides a strong, durable bond for construction, renovation, and repair work.

The styrene-free formula offers lower odour and is suitable for both indoor and outdoor use. This cartridge fits a standard heavy-duty sealant gun (310ml to 400ml), making it a practical choice for professional tradespeople and DIY users alike. Chemical anchoring is also well suited to close-to-edge fixing applications because it places less expansion stress on the substrate than many mechanical anchors.

Key Features

• Styrene-free chemical anchor resin

• High-strength bond for secure anchoring

• Suitable for concrete, brickwork, and masonry

• Ideal for threaded rods, bolts, and rebar

• Good choice for close-to-edge fixing applications

• 300ml cartridge for general site and installation work

• Fits standard heavy-duty sealant guns (310ml to 400ml)

• Suitable for indoor and outdoor use

• Low-odour formula

• Fast-setting performance (temperature dependent)

Specifications

• Brand: Everbuild

• Product Name: Anchorset Green 300 Styrene Free Chemical Anchor Resin

• MPN: ANCHGREEN

• Sika Code: 482457

• Barcode: 5029347606046

• Size: 300ml

• Type: Two-part chemical anchor resin

• Formula: Styrene free

• Cartridge Format: Standard cartridge

• Gun Compatibility: Fits standard heavy-duty sealant gun (310ml to 400ml)

• Suitable Substrates: Concrete, brickwork, masonry

• Use Area: Internal and external applications

Typical Applications

• Anchoring threaded rods into concrete and masonry

• Securing bolts and chemical anchor fixings

• Rebar installation in drilled holes

• Close-to-edge fixing where reduced expansion stress is beneficial

• Fixing railings, gates, brackets, and supports

• Structural and heavy-duty construction applications

• Masonry reinforcement and repair work

• DIY and trade anchoring projects

How to Use Anchorset 300

• Drill the hole to the required size and depth for the fixing.

• Clean the hole thoroughly to remove dust and debris (brush and air/vacuum cleaning recommended).

• Attach the mixing nozzle to the cartridge and load it into a suitable heavy-duty sealant gun.

• Dispense a small amount first until the resin mixes to a uniform colour, and discard this initial material.

• Inject resin into the hole from the base, withdrawing the nozzle slowly as the hole fills.

• Insert the threaded rod, bolt, or rebar with a slight twisting motion for even distribution.

• Allow the resin to cure fully before applying any load.

• Follow temperature-related curing guidance for best results.

Everbuild Anchorset Green 300 Chemical Anchor Resin – Key FAQs

• What is Everbuild Anchorset Green 300 used for?
  It is used for chemically anchoring threaded rods, bolts, rebar, and similar fixings into concrete, brickwork, and masonry.

• Is this product styrene free?
  Yes, Anchorset Green 300 is a styrene-free formula with lower odour, making it suitable for indoor and outdoor use.

• What size cartridge is this?
  This product is supplied in a 300ml cartridge.

• What gun do I need to use it?
  It fits a standard heavy-duty sealant gun suitable for 310ml to 400ml cartridges.

• Can it be used for close-to-edge fixings?
  Yes, chemical anchoring is ideal for many close-to-edge applications because it creates less expansion pressure than standard mechanical anchors.

• What materials can it be used in?
  It is suitable for concrete, brickwork, and masonry.

• Can it be used for heavy-duty fixings?
  Yes, it is designed for high-strength anchoring applications, provided correct installation and curing procedures are followed.

• Do I need to discard the first resin from the nozzle?
  Yes, always discard the first material until the resin is a uniform colour to ensure proper mixing.

• How long does it take to cure?
  Curing time depends on temperature and site conditions. Always allow full cure before loading the fixing.

• Can I use it for DIY projects?
  Yes, it is suitable for both DIY and professional users where strong, reliable anchoring is required.

Important Notes

• Use with a mixing nozzle and discard the first resin until a uniform colour is achieved.

• Thorough hole cleaning is essential for best performance.

• Curing time varies with temperature and conditions.

• Do not load fixings until the resin has fully cured.

• Can be used in a standard high quality sealant gun such as the HD Pro 400ml Sealant Gun.

• "Always read the Anchorset Green 300 Technical Datasheet prior to first use to ensure you have the correct information and  product for your application"

Take a look at the full range of Chemical Anchor Fixings to go along with your Adhesive