Silverline M10 Thread Repair Kit Helicoil Inserts Type M10 1.5mm 489540

Silverline Full M10 Thread Repair Kit Helicoil Type Inserts

Size: M10 x 1.5mm

MPN: 489540

Barcode: 5024763030949

Overview:

The Silverline M10 Full Thread Repair Kit Helicoil Type Inserts M10 x 1.5mm (489540) is a complete solution for restoring stripped or torn-out female threads in metal components. Commonly used on mechanical parts, housings and brackets, helicoil style sprung insert coils create a strong replacement thread that can be tougher and more durable than the original material. Suitable for repairs in steel, cast iron and aluminium, this kit includes the key tools needed to drill, tap and install the insert correctly, helping you return a damaged thread back to its original M10 x 1.5 size without having to re-tap oversize or replace the component.

Key Features

• Complete helicoil type thread repair kit for M10 x 1.5mm threads

• Restores damaged or stripped female threads in metal components

• Sprung insert coils create a strong, durable replacement thread

• Suitable for use in steel, cast iron and aluminium (application dependent)

• Ideal for workshop, automotive and machinery maintenance repairs

• Includes the essential drill, tap and installation tools in one kit

Specifications

• Brand: Silverline

• Product Type: Full Thread Repair Kit (Helicoil Type)

• Size: M10 x 1.5mm

• MPN: 489540

• Barcode: 5024763030949

• Suitable Base Materials: Steel / cast iron / aluminium (application dependent)

• Thread Type Repaired: Female (internal) threads

Kit Includes

• HSS tap

• Twist drill

• Coil driver tool

• Tang remover

• Spare helicoil type inserts (M10 x 1.5mm)

Applications

• Repairing stripped M10 x 1.5 threads in automotive components

• Restoring threads in machinery housings, brackets and casings

• Workshop maintenance and engineering repairs

• Fixing damaged threads where replacement parts are costly

• General mechanical servicing and refurbishment work

How to Use

• Drill out the damaged thread using the supplied twist drill.

• Tap the hole using the supplied HSS tap to create the correct insert thread.

• Thread the insert onto the coil driver tool and wind it into the tapped hole.

• Ensure the insert seats correctly below the surface where required.

• Use the tang remover to break off/remove the tang if needed.

• Fit the M10 x 1.5 bolt as normal and check for smooth engagement.

M10 Full Thread Repair Kit M10 x 1.5mm 489540 – Key FAQs

• What thread size does this helicoil kit repair?
  This kit is for repairing M10 internal (female) threads, restoring them back to the original bolt size.

• What is a helicoil type insert used for?
  It’s used to repair stripped or damaged threads by installing a sprung coil insert that forms a new internal thread inside the repaired hole.

• Which materials can I use this kit on?
  It’s suitable for repairs in steel, cast iron and aluminium, depending on the component and correct installation.

• Does the kit include the tools needed to install the inserts?
  Yes, it includes an HSS tap, twist drill, coil driver tool and tang remover, plus spare inserts.

• Are helicoil repairs strong?
  When installed correctly, the sprung insert coils can create a strong, durable thread that may be tougher than the original base metal thread.

• Do I need to remove the tang after installation?
  Many helicoil inserts require the tang to be removed after fitting, particularly when a through-bolt needs to pass fully. This kit includes a tang remover.

• Is this suitable for automotive repairs?
  Yes, M10 x 1.5 is a common size in automotive and machinery applications, making this kit useful for many workshop thread repair jobs.

See the full range of Helicoil Thread Inserts and Tools