Joint It Porcelain Epoxy Grout Removal Scraper ECSC01

Joint It Porcelain Epoxy Grout Removal Scraper

MPN ECSC01

Barcode 5391535770205

Joint It Porcelain Epoxy Grout Removal Scraper for use with Joint It Grey Porcelain Epoxy Pointing Grout a 2 part epoxy after application, used once the epoxy grout has begun to set use the scraper keeping the tool flat on the surface remove the excess product, if the grout seems sticky its not ready and needs to be given more time this is were you see the anti bonding wax coming into its own preventing product from staining and sticking to the face areas of the porcelain the epoxy grout should come away from this surface with ease, always use the blade away from you and others little pressure should be needed dont use the blade on areas that have not been waxed.

Applying Joint It Epoxy Grout:

Ensure paving is clean and dry and that rain is not expected before you can complete application.

Epoxy grout should not be used below 5 degree C or above 25 degree C, the paving tiles need to be laid securely with no movement in the slabs.

Apply the Joint It Anti Bonding wax to either side of the joints using the sponge provided this is an important step as this protects the slabs acting as a barrier between the grout and the slab, the anti bonding agent makes it easy to peel off the excess grout after smoothing, the areas should be waxed no more than 10 to 15 minuites before applying the epoxy grout.

Remover the twist cap from the top of the tube attach the mixing nozzle supplied with the tube, cut the noizzle to the size of the paving joints, insert the tube into the Joint It application gun squeeze the trigger to force the product through the mixing nozzle discard the first 2 centimeters of product as this may not be mixed thoughrally and may have streaks in it, now the product can be used apply the product slowly making sure that there are no gaps in your gunning the product needs to rise a fraction infront of the product to make sure that there is adequate product in the joint.

10 to 15 minuites after the grout has been applied its ready for smoothing with the Joint It epoxy Grout Finishing and Smoothing Tool the most comon tool is the ball end tool pull it allong the joint to firm the product and create a smooth finish.

Once the product has begun to set and feels hard to touch its time to use the scraper or blade keeping the tool flat on the surface remove the excess product, if the grout seems sticky its not ready and needs to be given more time this is were you see the anti bonding wax coming into its own preventing product from staining and sticking to the face areas of the porcelain the epoxy grout should come away from this surface with ease, always use the blade away from you and others little pressure should be needed dont use the blade on areas that have not been waxed.

Video Demonstration How to use and apply Joint It Epoxy Grout to Porcelain slabs in your outdoor living space.