Silverline Car Vehicle Scissor 1 Ton Replacement Jack 755985

Silverline Car Vehicle Scissor 1 Ton Replacement Jack 755985

Barcode: 5024763166648

MPN: 755985

Capacity: 1 Ton 1000kg

Overview:

Car Scissor Vehicle Jack 755985 is a compact, reliable 1 tonne (1000kg) jack, ideal as a replacement or spare for most cars and light vehicles. Its all-steel construction with an extended base provides stable support when lifting the vehicle for wheel changes or roadside repairs.

The jack features a folding quick-fit handle with a rubberised soft grip, making cranking smoother and more comfortable. A powder-coated body and zinc-plated components help protect against corrosion, ensuring long service life when stored in the boot or garage.

Key Features & Benefits:

• 1 tonne (1000kg) capacity – suitable for many cars and light vehicles

• Sturdy all-steel construction with extended base for stability

• Compact scissor design with folding handle for easy storage

• Quick-fit handle with rubberised soft grip for comfortable cranking

• Powder-coated and zinc-plated finish for corrosion resistance

• Ideal as a replacement or emergency jack for wheel changes

Applications:

• Emergency wheel changes at the roadside

• Routine tyre checks and rotation

• Lifting the vehicle for minor repairs and inspections

• Keeping as a compact backup jack in the boot or garage

How to Use:

• Park on a flat, solid surface and apply the handbrake.

• Place wheel chocks if available.

• Position the jack at the vehicle manufacturer’s approved jacking point.

• Attach the quick-fit handle and crank until the jack contacts the jacking point.

• Continue lifting within the 90–325mm height range until the wheel is clear of the ground.

• Perform the wheel change or inspection, then lower the vehicle slowly and remove the jack.

• Fold the handle and store the jack safely.

Never work under a vehicle supported only by a jack – always use suitably rated axle stands.

Specifications:

• Type: Scissor jack

• Maximum Capacity: 1 tonne / 1000kg

• Lifting Height Range: 90mm – 325mm (approx.)

• Material: Carbon steel

• Finish: Powder coated and zinc plated

• Handle: Folding quick-fit with rubberised grip

• Standard: Conforms to EN1494/A1:2008

FAQs:

• • Is this jack suitable for all cars?
  It’s suitable for many cars and light vehicles within its 1 tonne capacity, but always check your vehicle weight and jacking points.

• • What is the lifting range?
  The jack lifts from approximately 90mm up to 325mm, covering most standard ride-height vehicles.

• • Can I keep it in the boot?
  Yes, the compact design and folding handle make it ideal for boot storage as an emergency jack.

• • Is it rust resistant?
  The powder-coated and zinc-plated finish provides good protection against corrosion under normal use and storage conditions.

• • Can I work under the car using only this jack?
  No. Always support the vehicle with rated axle stands before working underneath.

• • Does it comply with any standards?
  Yes, it conforms to EN1494/A1:2008 for mobile jacking equipment.

See all the Mechanical and Auto related products