Bond It Instant Pot Hole Repair Easy Lay Tarmac 25kg BDPHR25

Bond It Instant Pot Hole Repair Easy Lay Tarmac 25kg Tarmacadam

MPN BDPHR25

Barcode 5060021369093

Bond it Black Pot Hole Repair tarmac a high specification tarmacadam permanent repair compound designed to instantly and permanently repair paths, roads and driveways

May also be used for remedial repairs around roadside ironwork manholes etc.

Permanent pot hole repairer can be applied at depths up to 100mm greater depths can be achieved by applying the layer-on-layer method.

Can be used with Ultra Crete Instant Tarmac Joint Sealer and Primer but not essential.

The perfect product for overlaying or making that new path.

Permanent pot hole repair compound has been formulated for high skid resistance due to the specially formulated bitumen and interlocking aggregate.

Bond it pot hole repair is simple to use on all tarmac drives and paths, no mixing required, bond it pot hole is suitable for instant trafficking.

Can be used in the wet freezing and hot sunny conditions.

Bond-it cold lay asphalt concrete pot hole repair compound for use on roads, pavements and car parks.

Bond it Pot Hole Benefits and Areas of Use

• Ready to use cold lay product just fill and compact down.
• No special preparation required
• Black in colour
• Instantly trafficable and will not displace stays where it is put
• Repairing tarmac roads, foot paths. driveways etc.
• Remedial work around iron works i.e. drains, manhole covers etc.
• Compatible with flexible road surfaces.
• can be applied at
• Depths up to 100mm.
• Greater depths can be achieved by applying the layer-on-layer method
• Non-flammable
• The perfect product for overlaying or making that new path.

Product Coverage

• Each container covers approximately 1 meter at 15mm depth when compacted

Application For Pot Hole Repair

1. Ensure pothole is free of debris and standing water.
2. Fill the pothole straight from the tub to a maximum of 100mm in one go.
3. Apply slightly proud of the pothole.
4. Tamp down to compact material to complete the application.
5. Holes deeper than 100mm apply the layer on layer method 100mm tamp 100mm tamp.

Always read the technical data sheet prior to use.

All Paving Path and Road