Blue Spot Tools Ironmongery 50mm x 50mm Black Powder Coated Wall Anchor Plate Staple 78071

Blue Spot Tools Ironmongery 50mm x 50mm Black Powder Coated Staple on Plate

MPN: 78071

Barcode: 5028734780710

Size: 50mm x 50mm

Weight: 0.11kg

Colour: Black

Overview:

This BlueSpot Tools 50mm x 50mm staple on plate is made from carbon steel. It screws flat to wooden surfaces and provides a fixed loop for chains, ropes, and hasp fittings. The black powder-coated finish protects the carbon steel from corrosion in outdoor conditions.

The pack includes all necessary fittings, and the plate carries a 5-year guarantee from BlueSpot Tools.

Key Features and Benefits

• Strong, load-bearing construction: Handles the demands of outdoor gate and fence hardware applications.
• Protective outer coating: Shields the base steel against moisture and outdoor corrosion.
• Fixed U-shaped loop: Accepts hasp fittings and chain links without further modification.
• Flush-fitting plate: Countersunk holes allow the plate to sit flat and secure against the surface.
• Ready to install: All necessary fittings come included in the pack.
• 5-Year Guarantee: 5-year manufacturer guarantee from the date of purchase.

Specs & Attributes

• Size: 50mm x 50mm
• Weight: 0.11kg
• Material: Carbon steel
• Finish: Black powder coat

Typical Applications

• Fitting to wooden shed doors as a fixed anchor point for hasp and padlock hardware
• Mounting on garden gate frames to provide a chain or rope attachment point
• Securing to fence posts and rails as a tie-down anchor
• Installing on timber outbuildings and storage units to accept padlock loops
• Attaching to workshop and garage door frames for exterior security hardware
• Fixing to exterior wooden structures as a general-purpose restraint anchor

How to Use

• Choose a position: Select the fixing location on the wooden surface and confirm the loop aligns correctly for its intended use.

• Mark the holes: Hold the plate against the surface and mark the four fixing hole positions with a pencil.

• Pre-drill pilot holes: Drill at each marked position to prevent the wood from splitting during screw insertion.

• Position the plate: Align the plate over the pilot holes with the loop facing the correct direction.

• Drive in the screws: Insert the supplied screws through the countersunk holes and tighten until the plate sits flush.

Frequently Asked Questions (FAQs)

• What is a staple on plate?
  A staple on plate is a flat mounting plate with a fixed U-shaped metal loop. It screws to a wooden surface and provides an anchor point for chains, ropes, or hasp fittings.

• What is the difference between a staple and a hasp?
  The staple is the fixed component - a plate with a rigid metal loop. The hasp is the hinged plate that pivots over that loop. A padlock passes through the loop to hold the hasp in place.

• Can a powder-coated staple plate be left outdoors permanently?
  Carbon steel with a powder coat finish withstands outdoor exposure when correctly fitted to wooden surfaces. Periodic checks for coating damage will help maintain the protection over time.

• What does powder coating do on outdoor ironmongery?
  Powder coating applies a dry polymer powder to the metal surface. Heat then cures the powder into a hard, protective layer that prevents moisture from reaching the base steel.

• What is carbon steel used for in ironmongery?
  Carbon steel is a common choice for outdoor ironmongery because its carbon content increases hardness and strength. It suits load-bearing structural applications such as gate hardware and anchor plates.

Summary

The BlueSpot Tools 78071 is a carbon steel outdoor anchor plate for wooden gates, fences, and shed doors. Its fixed U-shaped loop and black powder-coated finish make it a practical choice for permanent exterior hardware. The plate comes supplied with all necessary fixings and carries a 5-year BlueSpot Tools guarantee.