Amtech V2300 Drill Powered Fluid Liquid BSP Transfer Pump 68416C

Amtech V2300 Drill Powered Fluid Liquid BSP Transfer Pump 68416C M.C 1500 Litre per hr

MPN: V2300

Barcode: 5032759006809

Overview:

The Amtech V2300 Drill Powered Fluid / Liquid BSP Transfer Pump is a handy solution for moving clean water and other suitable non-acidic, non-flammable liquids using a standard power drill. Compatible with most corded and cordless drills, this compact pump can transfer up to 1,500 litres per hour (depending on drill speed) and up to 10 metres horizontally, making it ideal for garden and general household water moving tasks. Built with a strong nylon body, it features fixing slots so it can be secured down during use. It accepts 3/4" BSP connectors (not included), such as common threaded garden tap-style connectors. Performance is directly linked to drill RPM, with a minimum recommended speed of 1,500 RPM for effective pumping.

Key Features

• Drill powered transfer pump for quick water moving without mains power

• Up to 1,500 litres per hour flow rate (dependent on drill RPM)

• Transfers up to 10 metres horizontally (application dependent)

• Strong nylon body for durability and light weight

• Fixing slots allow the pump to be secured during operation

• Accepts 3/4" BSP threaded connectors (not supplied)

• Suitable for clean, non-acidic and non-flammable liquids

Specifications

• Brand: Amtech

• MPN: V2300

• Barcode: 5032759006809

• Pump Type: Drill powered liquid transfer pump

• Max Flow Rate: Up to 1,500 L/hr (approx., drill dependent)

• Recommended Minimum Drill Speed: 1,500 RPM

• Max Horizontal Transfer: Up to 10m (approx., conditions dependent)

• Body Material: Nylon

• Inlet/Outlet Thread: 3/4" BSP (connectors not included)

• Drive / Connector Size: 6mm

Applications

• Moving clean water in gardens and around the home

• Transferring water from containers, butts and tanks

• Draining small features or shifting water between vessels

• Light-duty pumping where a portable drill-powered option is preferred

How to Use

• Fit suitable 3/4" BSP connectors and attach hoses (connectors not included)

• Secure the pump using the fixing slots if required for stability

• Connect the pump drive to your drill (ensure correct fit and alignment)

• Prime the pump and hose with water before starting where possible

• Run the drill at or above the recommended minimum (1,500 RPM)

• Monitor flow continuously and stop immediately if the pump runs dry

• After use, flush with clean water and allow to drain and dry

Important Note

• Maximum dry run time is 12 seconds. (If no water is flowing, stop pumping and prime the pump. Running dry can cause overheating and permanent damage.)

Amtech V2300 Drill Powered Fluid Transfer Pump – Key FAQs

• What liquids can I use with the Amtech V2300 pump?
  It’s intended for clean water and other suitable non-acidic, non-flammable liquids. It is not suitable for flammable liquids or acidic fluids.

• Do I need a certain drill speed for it to work properly?
  Yes. Performance depends on drill RPM, and a minimum of around 1,500 RPM is recommended for effective pumping and flow.

• Does it come with hoses or connectors?
  No. It accepts 3/4" BSP threaded connectors, but fittings and hoses are not included, allowing you to choose the setup you need.

• How much can it pump per hour?
  Up to 1,500 litres per hour, depending on drill speed, hose length, liquid type and overall setup conditions.

• Can it pump water a long distance?
  It can transfer up to around 10 metres horizontally in suitable conditions. Real-world performance varies with hose size, restrictions and drill speed.

• What does “dry run maximum 12 seconds” mean?
  (The pump must not run without water for more than 12 seconds. If it runs dry, stop immediately and prime the pump to prevent overheating and damage.)

• Can I fix the pump down during use?
  Yes. The body includes fixing slots so you can secure it to a surface for stability and easier operation.

• Is it suitable for garden use?
  Yes. It’s especially useful for garden water transfer tasks, such as moving water from tanks or containers, provided the liquid is suitable and the pump is primed.