Silverline Sanding Belts 10mm x 330mm 80 Grit 5 Pack 386171

Silverline Sanding Belts - 10mm x 330mm - 80g - Pack of 5 - 386171

Barcode: 5060012966775

MPN: 386171

Overview:

The Silverline  80 Grit Sanding Belts 10mm x 330mm 386171 designed for controlled sanding and surface preparation using file belt sanders. Made with aluminium oxide abrasive resin bonded to a tough X-weight cloth backing, these belts offer dependable performance with good durability for regular workshop and site tasks. The 80 grit grade is ideal for general sanding—refining timber, smoothing edges and preparing surfaces before painting or finishing. Each belt features an overlap joint with extra top-skive to help reduce chatter, improving smooth running and control in tight or awkward areas. Compatible with all makes of electric, cordless and air-powered file belt sanders that take 10mm x 330mm belts, this pack of 5 is a practical option for day-to-day sanding jobs.

Key Features

• 80 grit belts for general sanding and preparation work

• Aluminium oxide abrasive for consistent cutting and long wear

• Resin bonded grain for improved durability

• X-weight cloth backing for strength and tear resistance

• Semi open coat helps reduce loading on dusty materials

• Overlap joint with extra top-skive helps reduce chatter

• Fits all 10mm x 330mm file belt sanders (electric or air powered)

• Pack of 5 for workshop and site use

Specifications

• Brand: Silverline

• MPN: 386171

• Barcode: 5060012966775

• Belt Size: 10mm x 330mm

• Belt Width: 10mm

• Belt Length: 330mm

• Thickness: 0.75mm

• Grit: 80 grit

• Abrasive Material: Aluminium oxide

• Bond Type: Resin

• Backing: X-weight cloth

• Coat Type: Semi open coat

• Joint Type: Overlap joint with extra top-skive

• Quantity: Pack of 5

Applications

• General sanding of timber edges, joints and profiles

• Preparing surfaces before painting, staining or varnishing

• Smoothing fillers and plaster repairs (light work)

• Removing light coatings and blending painted surfaces

• Light metal sanding and clean-up work (task dependent)

How to Use

• Confirm your sander uses 10mm x 330mm belts

• Fit and tension the belt according to your tool instructions

• Sand with even pressure and keep the belt moving to avoid grooves

• Let the abrasive do the work—excess pressure can increase wear

• Step up to finer grits after prep work if a smoother finish is required

Silverline 80 Grit Sanding Belts 10mm x 330mm – Key FAQs

• What is 80g best used for on a file belt sander
  80g is ideal for general sanding and preparation, smoothing rough timber, blending surfaces and getting materials ready for finer sanding or finishing.

• Will these belts fit my file belt sander?
  They fit any file belt sander that takes 10mm x 330mm belts. Check your tool manual or current belt size to confirm before ordering.

• What does X-weight cloth backing do?
  X-weight cloth backing adds strength and tear resistance, helping the belt cope better with edges, pressure and tighter sanding areas.

• Why is an overlap joint with top-skive important?
  It helps reduce the bump at the joint, lowering chatter and improving smooth running for better control and a cleaner sanding finish.

• Can these belts be used on paint and varnish?
  Yes. 80 grit is suitable for preparation and light removal. For heavy stripping, start with a coarser grit, then move to 80 grit to refine.

• Are they suitable for sanding metal?
  They can be used for light metal sanding and clean-up work. Use steady pressure and avoid overheating the workpiece for best results.