Silverline Professional Metal Grinding Discs 230mm 9 Inch 272328

Silverline Professional Metal Grinding Discs 9 Inch diameter 6mm thick

MPN: 272328

Barcode: 5024763124716

Overview:

The Silverline Professional Metal Grinding Disc 9 Inch 6mm Thick (272328) is a heavy duty grinding wheel for fast material removal on metal and alloy. Manufactured from premium aluminium oxide and reinforced with fibreglass mesh, it’s built for long life performance during fabrication, repair and general workshop grinding. Designed for use on 230mm (9") angle grinders with a 22.23mm bore, it’s certified to EN12413 with MPA approval Not suitable for aluminium or brass.

Key Features

• Heavy duty metal grinding disc for rapid grinding and dressing

• Aluminium oxide abrasive for efficient metal and alloy removal

• Fibreglass mesh reinforced for strength and durability

• Long life performance for workshop and site use

• Fits 230mm (9") angle grinders with 22.23mm bore

• EN12413 certified and MPA approved

• Not suitable for aluminium or brass

Specifications

• Brand: Silverline

• Product Type: Metal Grinding Disc

• Disc Size: 230mm x 6mm

• Bore / Centre Hole: 22.23mm

• Abrasive Type: Aluminium oxide

• Bond: Resin bonded

• Reinforcement: Glass fibre / fibreglass mesh

• Maximum Speed: 6,600rpm

• Certification: EN12413

• Approval: MPA approved

• Safety Marking: Expiry date stamped

• MPN: 272328

• Barcode: 5024763124716

Applications

• Grinding and dressing steel and general metalwork

• Removing welds and smoothing weld seams

• Cleaning up rough edges after cutting

• Shaping and preparing metal and alloy components

• General fabrication, repair and maintenance work

How to Use

• Check your grinder is rated for 230mm discs and does not exceed 6,600rpm

• Fit the disc using the correct flanges and ensure the guard is in place

• Allow the grinder to reach full speed before contacting the workpiece

• Use controlled, even pressure and avoid side-loading the disc

• Let the disc stop fully before setting the tool down or changing discs

Silverline 230mm Metal Grinding Disc 272328 – Key FAQs

• What is this grinding disc designed for?

  • It is designed for grinding metal and alloy, making it ideal for weld clean-up, edge dressing and general fabrication tasks on steel and similar materials.

• Will it fit a standard 9 inch angle grinder?

  • Yes, it is a 230mm disc with a 22.23mm bore, suitable for most 9" angle grinders that accept this common centre hole size.

• What is the maximum speed rating?

  • The disc is rated up to 6,600rpm. Always ensure your grinder’s no-load speed does not exceed the disc rating.

• Is it suitable for aluminium or brass?

  • No, it is not suitable for aluminium or brass. Use a disc specifically intended for non-ferrous metals for those materials.

• What safety tips should I follow?

  • Always wear suitable PPE, use the correct guard, avoid twisting or side-loading the disc, and stop using the disc immediately if it becomes damaged or out of date.