Silverline Bench Top Drill Pillar Stand Conversion 633764

Silverline Bench Top Drill Pillar Stand Drill Conversion

MPN: 633764

Barcode: 5055058177599

Overview:

The Silverline Bench Top Drill Pillar (Drill Conversion Stand) 633764 turns a compatible hand-held electric drill into a bench-mounted pillar drill for more accurate, repeatable drilling. Designed to accept drills with a 43mm collar diameter (or 38mm using the supplied reducing bush), it allows you to set up a stable drilling station in minutes. Using a stand helps keep holes straighter and more consistent than freehand drilling, making it ideal for workshop tasks where alignment matters. It also reduces bit wandering and uneven loading, helping improve hole quality and supporting longer drill bit life. A cast iron base with fixing points adds stability, while the depth scale and stop make it easier to control drilling depth for repeated holes.

Key Features

• Converts a compatible hand drill into a bench-mounted pillar drill

• Fits drills with 43mm collar diameter

• Includes reducing bush for 38mm collar drills

• Up to 60mm drilling depth for common workshop tasks

• Cast iron base with fixing points for stable, secure mounting

• Depth adjustment scale and stop for controlled, repeatable drilling

• Helps improve hole accuracy and maintain vertical drilling

• Drill not supplied

Specifications

• Brand: Silverline

• MPN: 633764

• Barcode: 5055058177599

• Product Type: Bench drill stand / drill press conversion stand

• Compatible Collar Sizes: 43mm (38mm with reducing bush)

• Max Drilling Depth: Up to 60mm

• Overall Height: 500mm

• Base Material: Cast iron

• Base Fixing Points: Yes

• Depth Scale & Stop: Yes

• Drill Included: No

Applications

• Vertical drilling in timber, plastics and light metals (bit/material dependent)

• Repeated holes to a set depth using the depth stop

• Workshop drilling where accuracy and alignment are important

• Reducing drill bit wandering and improving finish quality

How to Use

• Confirm your drill collar size is 43mm, or fit the reducer for 38mm drills

• Secure the stand to a workbench using the base fixing points

• Fit your drill into the collar and tighten securely

• Set the depth stop if you need repeat drilling depth control

• Clamp the workpiece and drill with steady, even pressure

• Raise the drill fully between holes and keep the column clean for smooth travel

Silverline Drill Stand Conversion – Key FAQs

• What drills will fit this drill stand?
  It fits hand drills with a 43mm collar diameter, and also 38mm collar drills when using the supplied reducing bush.

• How much drilling depth does it allow?
  The stand provides up to 60mm drilling depth, suitable for many common workshop drilling tasks.

• Why use a drill stand instead of drilling by hand?
  A stand helps keep the drill vertical, improving hole accuracy and reducing bit wandering—especially useful for repeated drilling and neater results.

• Does this come with a drill?
  No. The drill is not supplied—this is the stand only.

• Can I set a consistent drilling depth?
  Yes. It includes a depth adjustment scale and depth stop, ideal for repeatable holes to the same depth.

• Should I bolt the base down?
  For best accuracy and safety, yes. The cast iron base includes fixing points so you can secure it firmly to a bench or board.