Sika Sikaceram 282 Fibre Reinforced Int Ext Floor Wall Tile Adhesive 20kg 678298

Sika Sikaceram 282 Fibre Reinforced Internal External Powdered Floor and Wall Tile Adhesive grey 20kg Bag

Sika Code 678298

MPN SKCM282GY20

Barcode 5055492703767

Sika Sikaceram 282 Fibre Reinforced Internal External Powdered Floor and Wall Tile Adhesive grey 20kg Bag is a cement-based polymer modified powdered tile adhesive with standard setting properties.

Sikaceram 282 Grey can accommodate sub floor movement, Fibre Reinforced is a high strength, vibration tolerant high performing floor and wall tile adhesive the added flexibility and the reinforcement fibres from this product also makes it more suited to underfloor heating applications. Its built in crack resistance makes it ideal for applications where slight surface movement or vibration is likely to occur, this product’s long working pot-life and extended open time is designed for applications where extensive cutting is required during application.

Suitable for fixing most substrates including ceramic, porcelain, natural stone, concrete, chipboard and timber plasterboard.

SikaCeram 282 standard set fibre filled tile adhesive can be used for the interior and exterior fixing of all types of ceramic wall tiles, including mosaics, vitrified tiles, porcelain and natural stone such as travertine and marble.

Sika Sikaceram 282 is water resistant and is suitable for tiling domestic communal and power showers it also has superior crack resistance with excellent adhesion properties, and is suitable for fully immersed applications such as swimming pools.

This product is ideal for areas where movement or vibration is anticipated as well as being suitable for use with sub-floor heating, suitable for fixing directly to floating floors and stable tongue and groove timbers. SikaCeram 282 Fibre Reinforced is a high strength, vibration tolerant high performing floor and wall tile adhesive that is suitable for thick and thin bed applications. The adhesive is water-resistant and can be used in areas under constant water immersion such as swimming pools as well as bathrooms, kitchens, showers, remains workable for up to 4 hours depending on absorbency of the substrate and temperature.

Sika Sikaceram 282 Benefits and Areas of Use:

• Long setting time for areas needing more tile cutting.
• GREY in colour.
• Remains strong and intact even in areas of higher vibration.
  
• Excellent adhesion properties.
• Excellent flexibility built in crack resistance makes it ideal for applications where slight surface movement or vibration is likely.
• Suitable for underfloor heating.
  
• Can be used Internally and externally.
• Frost Resistant.
  
• Thick or thin bed adhesive from 3mm up to 10mm.
  
• Tiles can be grouted approximately 24 hours after fixing.
  
• Approximate coverage 5 meters square.
• Open time 4 hours.
  
• Water resistant, recommended for tiling domestic communal and power showers
• Areas under constant water immersion such as swimming pools as well as bathrooms, kitchens, showers..
  
• Extremely high bond strength.
• For securing floor and wall tiles to most surfaces.
• Can be used in heavy duty areas such as heavily walked floors.
• May also be used for patching small areas in concrete and stone etc.
• Suitable for fixing most substates including plasterboard, plywood, composite board, ceramic, porcelain, natural stone, concrete, chipboard and timber.
  

Sika Sikaceram 282 Grey Fibre Reinforced with Standard setting Time Instructions:

Plasterboard:

• Porous substrates like plasterboard must be primed with SikaBond SBR.
  

Gypsum plaster or Anhydrite:

• Prime with two coats of SikaBond SBR+ before use on bare unsealed gypsum or anhydrite floor.
• The first coat with a 1:1 dilution, and the second coat neat.
  

Concrete Screeds Renders:

• Allow fresh concrete etc to dry for at least 4 weeks before tiling.
• Prime surfaces with SikaBond SBR+ diluted 3 parts water to 1 part SBR+ and allow to dry.
• Surfaces such as tamp rutted concrete and masonry blockwork, that are rough or uneven, should be prepared with a suitable Sikafloor Self Levelling compound and allowed to fully cure for at least 24 to 48 hours before application.
  

Timber Floors floorboards:

• Suitable for interior floors only.
• Ensure adequate ventilation beneath floors.
• Wood floors can be covered with 12mm tile backer board or ply that is of moisture resistant grade.
• Secure with wood screws, not nails, at 150mm centres.
• Prime with SikaBond SBR+ at 1:1 dilution rate.

Softwood tongue and groove boarding:

• Boards must be screwed down to joists at 300mm centres and surfaces sealed with SikaBond SBR+ at 1:1 dilution

Existing Tilled Surfaces:

• Ensure tiles are securely bonded to wall or floor.
• Roughen surface of glazed tiles with sander.
• Apply a bonding coat of neat SikaBond SBR+.
• Apply mixed adhesive whilst bonding coat is still tacky.
  

Subfloor Heating:

• Fixing over a heated sub-floor requires adhesive to cure for at least 2 to 3 weeks before switching on the heating and gradually raising the temperature by 2 degrees at a time until the desired temperature is obtained.

Mixing:

• Sikaceram 282 fibre reinforced should be added to clean water in a mixing bucket and mixed with a paddle mixer if available.
• The sides of the bucket can be brought into the mix by using a bucket trowel to prevent any dry lumps in the mixed tile adhesive.
  
• Mix 20kg of powder with 5.5 litres of clean water.
  
• Always add powder to water.
  

Application:

1. Using a large notched trowel spread the adhesive evenly onto the substrate the Size of notches depends on size of tiles being used, the surface being tiled, the profile on back of the tiles, and degree of coverage required.
2. Press the tiles firmly into place using a slight twisting action.
3. Leave a grout joint this can be done using tile spacers unless self spacing tiles are used.
4. Surface adhesive should be cleaned from the faces of the tiles with a moist cloth or sponge.
   
5. Rake out excessive adhesive from within joints before setting takes place.
6. The open time of the exposed adhesive bed is approximately 4 to 5 hours depending on surface porosity and site conditions.
7. Grouting may proceed as soon as the tile bed is sufficiently firm, which will be around 24 hours at room temperature.
   
8. Do not use at temperatures below +5 deg C.

1. Allow 24 hours before grouting depending on site conditions or when tiles are sufficiently firm to accept light foot traffic.
2. Follow the manufacturer’s instructions for protecting and sealing the tiles before and after grouting.
   

Always Read the Official Technical Data sheet prior to use to make sure you have all the details are correct and that there have not been any changes to instructions.

Sika SKCM282GY20 Official Information:

Sika SikaCeram 282 Fibre Reinforced Standard Set Tile Adhesive Technical Data Sheet

Sika SikaCeram 282 Fibre Reinforced Standard Set Tile Adhesive  Safety Data Sheet

SikaCeram 282 Tile Adhesive Manufacturer Product Page