Owatrol Marine Strip Paint & Antifouling Stripper Remover 2.5 Litre Antifoul DIL-2.5

Owatrol Marine Strip Paint  and Anti fouling Paint Stripper 2.5 Litre

Option: DIL-2.5

Barcode: 3297973502632

Owatrol Marine Strip Paint & Antifouling Stripper Remover 2.5 Litre – Antifoul Dil 25 - Powerful & Eco-Friendly Paint and Antifouling Remover for Marine Surfaces

The Owatrol Marine Strip Paint & Antifouling Stripper is a powerful yet biodegradable gel-based remover designed to effectively strip multiple layers of paint, antifouling, and varnish in a single application. Its non-caustic formula makes it safe to use on gelcoat, wood, and metal surfaces, without damaging the substrate. Unlike conventional strippers, Marine Strip stays active for longer, ensuring deep penetration for thorough and effortless paint removal.

Trade Option 2.5 Litre Remover. Marine Strip is a powerful water-soluble paint and anti foul anti-fouling stripper, designed for marine uses which can remove up to 8 coats in just one application, perfect for use on boat gel coats as its gel consistency means no drips, even on vertical surfaces, safe to use on virtually any surfaces including wood, plastic, metal and GRP and it makes stripping even intricate detailing, as its water-soluble, Marine Strip can simply be rinsed away with water using a pressure washer.

Marine Strip has an active working time of up to 12 hours meaning it does not require constant supervision and immediate removal as some products do, VOC free and non-flammable, so Marine Strip is safe to use in poorly ventilated or confined areas, Marine Strip is a must-have for all boat owners, a powerful but easy to use paint stripper for almost any surface on your boat, "Marine Strip is not effective on 2 component, baked-on paints or polyurethane paint and varnish.

Key Features Benefits and Breakdown of Marine Strip 2.5 litre

• Removes multiple layers in one application – Effectively strips antifouling, paints, stains, and varnish without damaging the surface.
• Safe for use on marine and exterior surfaces – Suitable for gelcoat, wood, metal, and fiberglass.
• Biodegradable & non-caustic formula – Contains no solvents or harsh chemicals, making it safer for the user and the environment.
• No need for sanding – Dissolves coatings for easy removal without excessive manual effort.
• Long-lasting action – Stays active for up to 24 hours, allowing for deep penetration and maximum effectiveness.
• Will not damage gelcoat – Unlike harsh chemical removers, it preserves the integrity of the substrate
• Solvent free - No toxic fumes.
• Easily removed with water.
• MARINE STRIP is safe on all surfaces except Aluminium.
• Does not harm plastic. Safe on Gelcoat.
• Removes up to 8 coats of paint in one operation.
• Does not evaporate - Long active work time.
• Easy to apply Gel - Does not run.

Good Practice:

1. Always carry out a preliminary test to determine the contact time required for stripping and suitability.
2. Wear chemical resistant gloves, safety goggles and protective clothing.
3. When stripping vertical surfaces, work from bottom to top to avoid streaking.
4. For best results on wood, do not let Marine Strip work longer than required to dissolve the paint.
5. Hardwoods, especially those rich in tannins (Teak, Mahogany, Iroko, Oak etc)
6. can turn dark if in prolonged contact.
7. Where Marine Strip has darkened the wood do not allow it to dry, prior to using Deck Cleaner.
8. Treat stripped wooden surfaces with Deck Cleaner to restore the woods original colour.
9. Cover and protect everything you do not wish to strip, including any aluminium.

Also Available for those Smaller Jobs:

Owatrol Marine Strip Paint and Antifouling Stripper Remover 1 Litre

Coverage:

• 4m Square per litre.
• Restrictions: 
• Marine Strip will not remove the following type of coatings:
• 2 pack or baked on paints.
• Polyurethane paint and varnish.
• Do not use on aluminium.
• Clean-up:
• Clean surfaces with water.

Why Choose Owatrol Marine Strip?

This marine-grade paint and antifouling remover is ideal for boat owners, marine professionals, and DIY users looking for an effective yet environmentally responsible solution. Its biodegradable formula ensures safe application without damaging gelcoat, fiberglass, or wood surfaces. Unlike harsh chemical removers, it offers deep penetration, long-lasting action, and effortless removal of multiple layers in one go.

Owatrol Marine Strip 2.5 Litre (FAQs)

1. How many layers of paint can Marine Strip remove at once?
   It can remove several layers in one application, depending on the thickness and type of coating.

2. Is Marine Strip safe for use on gelcoat?
   Yes! It is formulated to protect gelcoat surfaces, making it ideal for boats, yachts, and marine structures.

3. Can I use this on vertical surfaces?
   Yes! The gel consistency prevents dripping, making it suitable for vertical and overhead applications.

4. Do I need to sand the surface after stripping?
   No sanding is required. Once Marine Strip has removed the old paint, simply rinse and dry the surface before repainting.

Please take a look at the technical data sheet for further information.