Everbuild Stick 2 Rapid Epoxy Tube Adhesive S2RAPEXTUBE

Everbuild Stick 2 Rapid Epoxy Tube Adhesive 24ml

MPN S2RAPEXTUBE

Sika Code 490483

Barcode 5029347605964

STICK 2 RAPID EPOXY two part clear adhesive system an industrial strength adhesives that sets hard in just 4 minutes.

Rapid Epoxy Tube is ideal for bonding craft projects, metals, crockery, glass, wood, china, dry concrete, rubber, fabrics, crystal, jewellery precious stones and various hard plastics.

Epoxys are exceptionally Strong and may be drilled, sanded, machined & painted once fully cured.

Instructions:

• Ensure surfaces are clean, dry and are free from flaking material, dust, rust and grease. roughen surfaces with sandpaper to improve adhesion. squeeze out equal quantities of the resin and hardener from their separate tubes into the mixing tray provided and mix for 30 seconds to 1 minute.
• Mixed adhesive is usable for only 4 minutes so only mix small quantities in one go, apply adhesive immediately to both surfaces, assemble hold or clamp until adhesive starts to cure.
• Note: adhesive will cure faster at higher temperatures and, conversely, slower at low temperatures.
• At 20 deg C the adhesive sets hard in 4 minutes and is fully cured in 12 hours. Carefully remove any residual adhesive with a sharp knife before adhesive sets.
  

S2RAPEXTUBE Data Sheets:

Stick 2 Rapid Epoxy Tube Technical Data Sheet

Stick 2 Rapid Epoxy Tube Adhesive Safety Data Sheet

Everbuild Epoxy Tube Manufacturer Page

All Super Glues and Carded Adhesives