Alpha Chem Hard Surface Floor Defence Protector 25m X6DFENDH25

Alpha Chem Hard Surface Floor Defence Protector 25 meter

From Cromar

Barcode 5036684020701

MPN X6DFENDH25

Alpha Chem Hard Surface Floor Defence Protector on a 25 meter roll is the ultimate self adhesive hard surface protector, Ideal for protecting against mess, dirt, staining, spillages and soiling that occurs

during painting and Building work.

Alphacem hard surface protector is a clear in colour multi‐purpose, contractors grade, self adhesive floor protector.

Protects most hard surfaces including timber, ceramic tiles, laminate, vinyl, metal and stone.

Floor defence hard surafeac can also be used to protect worktops, window cills, doors, kitchen units and glass practically any hard surface.

Totally waterproof, protects against expensive to clean paint spillages on hard surfaces.

Due to the adhesive face being reverse wound alphachem hard surface floor defence is easily unwinds with minimum effort

Ideal for providing a superior level of protection on all types of hard surfaces, including timber, hardwood, ceramic, vinyl, laminate, stone floors and worktops, from potentially expensive damage and spills – the perfect partner for any decorating, DIY or building work that needs to be done in the home or work site.

Alphachem Floor Defence provides a safer alternative to dust sheets, which can be a trip hazard, and is easy to apply without the need for a special applicator.

Being reverse wound the rolls are easy to apply, can be left down for up to 28 days, and are easily removed once a job is finished, leaving no adhesive residue behind.

Will not creep and wrinkle after application.

Easily removed, will not leave a sticky residue.

Can be left for up to approximatley 4 weeks.

Adheres to most common hard surfaces.

Safer than dust sheets as there are no trip hazards associated with normal cotton dust sheets.

Alphachem Hard floor Limitations

This product is for application to hard surfaces only

Remove after a maximum of 4 weeks to prevent a sticky residue being left.

In heavily trafficked areas or where air temperature is high Alphacem hard surface may need to be removed much sooner.

Avoid using under floor heating whilst product is in situ.

Main Points

• Ideal for all types of hard surfaces
• Can be left down for up to 28 days
  
• Protects against spills and damage
• Safer alternative to dust sheets
  
• Leaves no residue
• Reverse wound for ease of application
  
• No applicator required
• Easy to apply and remove
  
• 50 micron thickness
• 600mm Wide
• 25 Meters Long

Directions

• Ensure all surfaces are clean, sound, dry and free from dust, oil, solvents or other chemicals
• Simply unwrap the roll, pull out a short length and place sticky side down on the surface to protect
• Unwind the roll, ensuring adhesion to the surface as you go, and cut off the product with a knife when the edge of the surface is reached
• Take care to remove Floor Defence within 28 days of application