Everbuild Overlap Wallpaper Border Adhesive 250g 488615 BORD2

Everbuild 250g Overlap and Wallpaper Border Adhesive 88615 EVB-BORD2

Barcode: 5029347601799

Sika Code: 488615

MPN: BORD2

Size: 250g Tube

Colour: White Dry's Clear

Product Overview:

The Everbuild Overlap & Wallpaper Border Adhesive is a ready-to-use, high-strength paste designed to make wallpaper jobs simple. Supplied in a handy 250g Easi-Squeeze tube, it’s perfect for sticking down wallpaper seams, borders, or doing quick touch-ups and repairs. Whether you’re putting up a feature border or fixing peeling edges, this adhesive delivers a strong hold while allowing time for repositioning.

Suitable for all types of wallpaper including vinyl it’s a go-to product for both professionals and DIY decorators. The formula also includes a powerful fungicide to help stop mould, making it a smart choice for humid areas like kitchens and bathrooms.

Key Features:

• 250g easy-squeeze tube for clean, direct application

• High initial tack for fast grip and long-lasting hold

• Suitable for all wallpaper types including vinyl

• Includes a fungicide to prevent mould

• Allows repositioning before setting

• Dries clear for a clean, invisible finish

• Perfect for border application or overlap repairs

Coverage:

A single 250g tube covers approximately 10 metres of a 130mm (5-inch) deep border.

How to Use:

For Borders:

1. Cut the border to size.

2. Lightly score any vinyl wallpaper where the border will sit.

3. If using pre-pasted borders, moisten first.

4. Squeeze adhesive directly onto the back of the border and spread evenly.

5. Position the border on the wall and smooth down using a sponge or cloth.

6. Wipe away any excess adhesive with a damp cloth.

For Overlap Repairs:

1. Apply adhesive to the fixed wallpaper area.

2. Press the loose overlap section into place firmly.

3. Smooth down with a brush or cloth.

4. Clean off any residue immediately.

Typical Applications:

• Hanging new wallpaper borders

• Fixing peeling wallpaper seams

• Overlapping wallpaper joints

• Making small touch-up repairs

• Bordering vinyl or textured walls

FAQs

1. Can I use this adhesive on vinyl wallpaper?
Yes, it’s specially made for vinyl and works great on other wallpaper types too.

2. Does this adhesive dry clear?
Yes, it goes on white but dries clear for a clean, professional finish.

3. Is this good for fixing peeling wallpaper?
Absolutely. Just apply it to the loose edge and press it back into place.

4. Can I use this for heavy or textured borders?
Yes, it’s strong enough for textured and heavy borders — just make sure to press firmly.

5. How much area does one tube cover?
One 250g tube covers around 10 metres of a 130mm (5-inch) deep border.

6. How long does it take to dry?
Drying usually takes up to 24 hours, depending on room temperature and humidity.

7. Is it mould resistant?
Yes, it contains a fungicide to help stop mould growth.

8. Can I reposition the border after applying it?
Yes, it gives you a short working time to reposition before it fully sets.

9. How do I clean off excess adhesive?
Use a damp cloth straight away to wipe off any glue that gets on the printed side.

10. How should I store leftover adhesive?
Seal the cap tightly and keep the tube in a cool, dry place out of direct sunlight.

Always Read the Official Technical Data sheet prior to use to make sure you have all the details are correct and that there have not been any changes to instructions.

All Decorating Products