Everbuild Aquaseal Tanking System Standard Size 4.5 Meter Kit
Aquaseal Code: AQWRSSTDKIT
Barcode: 5029347611262
The Aquaseal Wet Room System Standard size kit is designed to provide a permanently flexible watertight membrane prior to tiling
Use in areas such as showers, wet rooms, wet zones, bathrooms, tiled areas subject to water exposure, balconies, partially covered external areas.
"Based on tried and tested wet room tanking principles used in areas such as Scandinavia & Germany where wet rooms have been common for many years"
Kit consists of a primer, tanking tape, tanking membrane drain mat.
Areas for Use:
For showers, wet rooms and wet zones in bathrooms
Use on all board joints, corners & pipe entries.
Waterproofing prior to tiling.
For use on plasterboard, MDF, concrete, wet room boards, plywood etc.
ply lined wooden floors
Limitations:
Do not use on timber treated with spirit or stearate based coatings
Do not use in areas subject to high temperatures
It is the users responsibility to determine suitability for use. If in doubt contact Everbuild Technical Services for advice.
Preparation:
All surfaces must be clean sound and dust free.
Standard Size Kit:
Aquaseal Wet Room System is a Waterproof Tanking Kit that contains all you need to waterproof 4.5 square metres
Products in 4.5 meter kit
STEP 1 WATERPROOF TANKING PRIMER 1 x 1 Litre
A ready to use primer, applied by brush to all porous and semi porous surfaces in the areas that are to be waterproofed.
It is quick drying and can be over coated after 1 hour same size in both kits
STEP 2 WATERPROOF TANKING TAPE 5 Meter
Self adhesive joint & corner sealing butyl backed fleece tape that should be applied to all corner joints, board joints and pipe penetrations to provide a watertight seal that accommodates cross directional movement.
The tape can be over coated with Aquaseal Waterproof Tanking Membrane immediately after application. On internal corners ensure the tape overlaps on both sides to avoid a weak spot in the centre of the internal corner.
STEP 3 WATERPROOF DRAIN MAT x 1 300mm x 300mm
Self adhesive butyl backed fleece capable of coping with board movement around the drain outlet, which is the area most susceptible to water leaks.
STEP 4 TANKING MEMBRANE - 3 Litre
A ready to use, liquid waterproofing compound which is applied in a 2 coat system by brush to provide a permanently flexible watertight membrane. Non-hazardous and solvent free. It is quick drying and tiling can commence after 24 hours.
Everbuild AQWRSSTDKIT Datasheets:
Aquaseal Tanking System Technical Data Sheet
Aquaseal Tanking Tape Safety Data Sheet
Aquaseal Tanking Membrane Safety Data Sheet
Aquaseal Tanking Primer Safety Data Sheet
Data | |
Reference Code | AQWRSSTDKIT |
Option Text | 4.5 meter kit |
Name | Link |
---|---|
Everbuild Aquaseal Tanking Reinforcing Mat Safety Data Sheet | Download Attachment |
Everbuild Aquaseal Tanking Tape Wet Room Safety Data Sheet | Download Attachment |
Everbuild Aquaseal Tanking Wet Room Instructions Technical Data Sheet | Download Attachment |
Everbuild Aquaseal Tanking Wet Room Membrane Safety Data Sheet | Download Attachment |
Everbuild Aquaseal Tanking Wet Room Membrane Technical Data Sheet | Download Attachment |
Everbuild Aquaseal Tanking Wet Room Primer Safety Data Sheet | Download Attachment |
Everbuild Aquaseal Tanking Wet Room Primer Technical Data Sheet | Download Attachment |