Wera VDE Electrical Insulated Screwdriver Set inc Screw Grips WERTBK160I7

Wera VDE Electrical Insulated Screwdriver 6pc Set Plus Screw Grip WERTBK160I7

MPN 0534458900

Barcode 4013288175649

This 6 piece set includes a selection of 4 Slotted tip screwdrivers and 2 Phillips tip which can also be used on Pozidriv screws, in addition to these, there are 2 screw grippers in the set.

This is a high quality set of VDE Screwdrivers from Wera, designed for the Professional Electrician but is also ideal for all professional and trade users,

whether you are working on electrical items or not, this includes builders, carpenters, mechanics, service engineers andfitters, kitchen fitters,

plumbers and anyone who needs a fine quality tools.

Contents of the Set

• 1 - 0.4 x 2.5 x 80mm slotted
• 1 - 0.6 x 3.5 x 100mm slotted
• 1 - 0.8 x 4.0 x 100mm slotted
• 1 - 1.0 x 5.5 x 125mm slotted
• 1 - ph1 x 80mm philips
• 1 - ph2 x 100mm philips
• 2 - Screw Grippers

The screwdriver tips have been hardened so as not to damage the screw head and to provide a long service life.

Laser Etched Tips an important feature on these screwdrivers is the "Slip Stop tips", they have precision angled laser cut grooves in the tips these grip the screw head when you are tightening or undoing a fixing, yhis etched tip enables the screwdriver to grip the head of the screw or fixing

when pressure is exerted this greatly reduces the risk of the screwdriver sliping out of the screw.

Real Deals For You Wera VDE Screwdriver Set Demonstration Video

Using the Screw Grippers:

The screw grippers provide a real benefit when you are working over head or are having to stretch to put a screw in place

The screw grippers slide over the shaft of the screwdriver until the sprung loaded jaws are almost level with the tip, you then place the screw

between the jaws and slide it up so that tip of the screwdriver is in the end of the screw,

This holds the screw and you are able to start screwdriving without the screw falling off the end of the screwdriver.

As you are tightening the last few turns of the screw, the jaws of the screw gripper automatically open and release the screw so that you can drive it home.

Fully tested individually for dielectrics trength under a load of 10,000 volts so as to ensure safe working with loads up to 1,000 volts.

Wera VDE Electrical Insulated Screwdriver 6pc Set and Screw Grip Video demonstration

See all the Screwdriver and Bit Options