Skip to Content
Shopping Basket
Your basket is empty.

Everbuild Black Jack Self Adhesive Flashing Tape 10m X 225mm

Ref: QR23144
Everbuild Black Jack Self Adhesive Flashing Tape 10m X 225mm
£18.33
£22.00 inc. VAT
NOW £15.95
£19.14 inc. VAT
In Stock

Purchase

Total Discount Price:

? x Everbuild Black Jack Self Adhesive Flashing Tape 10m X 225mm:
£19.14
 
£15.95 ex VAT
Select Quantity and choose Add To Basket

Description

Everbuild Black Jack Self Adhesive Flashing Tape 10m x 225mm

 

 

 

everbuild flashing tape 10m 225mm FLAS225

 

Everbuild Flashing Tape 10m x 225mm

Product Option: FLAS225

Barcode: 5029347099046

225mm Wide Aluminium foil and a bitumen rubber Strong self adhesive flashing tape
The adhesive forms a strong waterproof seal by the simply pressing the tape into place by hand or
seam roller.

 

Benefits & Areas of Use:

Replaces need for expensive lead flashing.

Self-adhesive requires no separate glue.

General repair to existing flashing.

Flashing bituminous felt and similar types of roofs.

Flashing parapet walls.

Sealing roof glazing.

Replacing lost lead flashing.

Repairs to cracks in concrete.

Repairs to lead gutters.

Sealing capping bolts in roof sheets.

Sealing roof ridges.

Flashing between timber brickwork or blockwork cavities.

Flashing of skylights

 

Preperation Required:

Surfaces must be dry,

Sound free from oil, grease and dust

Remove all loose material by scraper or wire brush.

Porous surfaces, such as concrete or brick, should be primed using Everbuild flashing tape primer.

 

How to Apply Flashing Tape:

Cut to the required length.

Peel beck approximately 5cm of release carrier and place the tape into position.

Continue removing the release carrier whilst firmly placing the tape

Avoid unnecessary creasing.

Ensure intimate contact and ensure no air is trapped.

Using a small roller ensure that all edges and overlaps are sealed properly.

Overlaps should be at least 25mm.

 

Product Notes:

Bring up to temperature or heat bitumen adhesive layer with a hot air gun to improve adhesion & pliability. Prime porous surfaces with Everbuild flashing primer.

Do not apply to damp surfaces.

In cold weather adhesion may be reduced.

Awkward areas and tops of existing lead flashing can be pointed using

Everbuild Lead mate or Sika lead and gutter sealant

larger flat areas can be coated with Evercryl Fibre reinforced coating.

 

 

Product Data Sheets:

225mm Flashing Tape Technical Data Sheet

225mm Flashing Tape MSDS Safety Data Sheet

 

Related Product:

 

DIY Seam Roller

Extensions

default
Reference Code:
FLAS225
Option Text:
10m x 225mm
Option Colour:
grey