Skip to Content
Shopping Basket
Your basket is empty.

Everbuild Black Jack Self Adhesive Flashing Tape 10m 100mm 6pk

Ref: QR23577
Everbuild Black Jack Self Adhesive Flashing Tape 10m 100mm 6pk
£66.20 inc. VAT
NOW £41.93
£50.31 inc. VAT
In Stock


Total Discount Price:

? x Everbuild Black Jack Self Adhesive Flashing Tape 10m 100mm 6pk:
£41.93 ex VAT
Select Quantity and choose Add To Basket


Everbuild 10m x 100mm Black Jack Self Adhesive Flashing Tape 6 Box

Everbuild Black Jack Self Adhesive Flashing Tape 10m 100mm 6pk

Everbuild Flashing Tape 10m x 100mm

Trade Product Option: Box of 6

MPN: FLAS100-6

Barcode: 5029347902001

100mm Wide Strong self adhesive flashing tape Box of 6

Aluminium foil and a bitumen rubber adhesive.

The adhesive forms a strong waterproof seal by the simply pressing the tape into place by hand or roller.


Replaces need for expensive lead flashing.

Self-adhesive requires no separate glue.


General repair to existing flashing.

Flashing bituminous felt and similar types of roofs.

Flashing parapet walls.

Sealing roof glazing.

Replacing lost lead flashing.

Repairs to cracks in concrete.

Repairs to lead gutters.

Sealing capping bolts in roof sheets.

Sealing roof ridges.

Flashing between timber brickwork or blockwork cavities.

Flashing of skylights


Prime porous surfaces with Everbuild flashing primer.

Do not apply to damp surfaces.

In cold weather adhesion may be reduced.

Bring up to temperature or heat bitumen adhesive layer with a hot air gun to improve adhesion & pliability.


Surfaces must be dry,

Sound free from oil, grease and dust

Remove all loose material by scraper or wire brush.

Porous surfaces, such as concrete or brick, should be primed using Everbuild flashing tape primer.

Awkward areas and tops of existing lead flashing can be pointed using Everbuild Lead mate or Sika lead and gutter sealant larger flat areas can be coated with Evercryl Fibre reinforced coating.


Cut to the required length.

Peel beck approximately 5cm of release carrier and place the tape into position.

Continue removing the release carrier whilst firmly placing the tape

Avoid unnecessary creasing.

Ensure intimate contact and ensure no air is trapped.

Using a small seam roller ensure that all edges and overlaps are sealed properly.

Overlaps should be at least 25mm.

Data Sheets:

100mm Flashing Tape Technical Data Sheet

100mm Flashing Tape MSDS Safety Data Sheet

Everbuild Flashing Tape Product Page

Related Product:

DIY Seam Roller


Reference Code:
Option Text:
100mm Box of 6
Option Colour: