Sika Damp Proof Slurry DPM 25kg SKDPSLUR25

Brand: Sika
 QR29984 |  In Stock

  • RRP£61.58 Inc. VAT
  • OUR PRICE £29.66

    £35.60   Inc. VAT
  • Product Code: SKDPSLUR25
  • SKU: 102198
  • EAN: 5055047201021
  • MPN: 


Interest free

Sika Damp Proof Proofing Slurry DPM 25kg

MPN SKDPSLUR25

Sika Code 102198

Barcode  5055047201021


Sika Damp-proofing Slurry in a 25kg bag a ready to use just add water, water proofing brush able or trowel able membrane.

Its a high quality thin layer waterproof slurry coating.

Based on special cements and admixtures to provide a water and damp proof finish.

When mixed with water a slurry or mortar material is produced for direct application to a variety of construction substrates.


Sika Damp-proofing Slurry is used for:

Waterproof coating for tanking residential domestic and commercial premises basements and areas with damp issues.

Thin layer mortar or slurry coating lining for internal water-proofing damp-proofing of basement and cellar walls and floors

For interior and exterior damp proofing of basement walls in new buildings.

For interior and exterior waterproofing of concrete, renders, brickwork and blockwork structures, Lining of water tanks, pools, planters etc.


Characteristics:

  • Low odour compared to traditional DPM bitumen coatings
  • Easy to use and apply
  • BBA approved
  • Just add water
  • Brush, trowel or spray applied
  • Easy and fast mixing
  • Consistency can be varied to suit application method
  • Good adhesion
  • Excellent workability
  • Protects against water penetration
  • Non toxic


Layer Thickness:

  • 1mm min. 2mm max in 1 coat.
  • For damp-proofing use minimum 2.0mm thickness
  • For waterproofing use minimum 4.0mm thickness 2 coats minimum by brush.


Coverage:

Dependent on the substrate roughness, surface profile and thickness of the layer applied.

As a guide, 2.1 kg/m2/mm excluding allowances for loss wastage, surface profile and porosity, etc.

1 unit of 25 kg yields will cover approximately 6.5-7.0m2 @ 2.0mm thickness.


Mixing:

Slurry application by brush: 4.5 4.7 Litres of water per 25 kg bag.

Mortar application by trowel: 4.0 4.25 Litres of water per 25 kg bag.

Spray application: 4.0 4.5 Litres of water per 25 kg bag.


Waiting Time and Over coating:

Apply 2nd coat within 24 hours of first coat.


Notes:

Sika Damp-proofing Slurry does not provide a trafficable finish on floors it will need to be protected with a levelling screed.

Special attention is required to avoid puncturing the waterproof coating with fixings, these should be accommodated either by surface bonding

with Sikaflex EBT adhesive or similar high bond adhesive.


Sika Damp Proofing Slurry will not bond to surfaces that have been treated previously with a water repellent.

Finishing plasters may take longer to set when applied over the Damp-proofing Slurry.


Always refer to Sika Technical Datasheet before using this product


Sika Official Information:

Sika Damp Proofing Slurry Technical Data Sheet

Sika Damp Proofing Slurry Safety Data Sheet

Sika Damp Proofing Slurry Declaration Of Performance


Manufacturer Information Page


Data
Reference Code SKDPSLUR25
Reference Code sika 102198
Type Damp Proofing slurry
Size 25kg
Special Features Trowelable or brushable
Colour Grey Green
Name Link
Sika Damp Proofing Slurry Declaration Of Performance Download Attachment
Sika Damp Proofing Slurry Safety Data Sheet Download Attachment
Sika Damp Proofing Slurry Technical Data Sheet Download Attachment

Related Products