Everbuild 902 Black Jack Bitumen & Flashing Primer 5 litre

Everbuild 902 Black Jack Flashing Primer 5 litre

MPN: 90205

Barcode: 5029347009250

Product Description:

Everbuild 902 Bitumen Primer used to give a key prior to applying

bitumen paints and roof coatings.

Also suitable as a primer prior to applying any Flashing Tape.

902 Benefits & uses

Mainly used for priming

Concrete roofs, floors, cementicious screeds, renders, Bitumen felt, asphalt, mastic

Weathered corrugated iron, steel, Wood.

Fast drying.

Suitable for use with all bituminous surface coatings

Product Limitations:

Do not use in areas where subsequent solvent contact is likely.

Avoid inhalation of vapours in confined spaces.

Allow sufficient drying time before overcoating.

Surface Prep

Preparation of the surface All surfaces must be sound, stable and thoroughly

clean and dry.

New galvanised surfaces should be scraped down with a hand scraper

roughened with a wire brush or treated with a proprietary etch primer.

Fibre cement or rag felt apply generously to saturate the surface.

Metal surfaces should be wire brushed to remove rust.

can be applied over red lead or zinc phosphate

Remove tar based paint systems before use.

Coverage

4 to 6 meters Square per litre depending on porosity of subsrate

11 meters square per litre on non porous surfaces

Everbuild Datasheets:

Everbuild 902 Flashing Primer Technical Data Sheet

Everbuild 902 Flashing Primer MSDS Safety Data Sheet

Everbuild 902 Product Page