Wera VDE Electrical Insulated Screwdriver Set & Screw Grips 05344589001
Description
Wera VDE Electrical Insulated Screwdriver Set & Screw Grip 05344589001

Wera VDE Electrical Insulated Screwdriver 6pce Set Plus Screw Grip
MPN: 05344589001 WERTBK160I7
Barcode: 4013288175649
Product Features and Description:
This 6 piece set includes a selection of 4 Slotted tip screwdrivers and
2 Phillips tip which can also be used on Pozidriv screws.
In addition to these, there are 2 screw grippers in the set.
Real Deals For You Deals Unlocked Wera VDE Screwdriver Set Demo:
This is a high quality set of VDE Screwdrivers from Wera, designed for the
Professional Electrician but is also ideal for all professional and trade users,
whether you are working on electrical items or not, his include's builders,
carpenters, mechanics, service engineers and fitters, kitchen fitters,
plumbers and anyone who needs a fine quality tools.
Contents of the Set:
1 - 0.4 x 2.5 x 80mm slotted.
1 - 0.6 x 3.5 x 100mm slotted.
1 - 0.8 x 4.0 x 100mm slotted.
1 - 1.0 x 5.5 x 125mm slotted.
1 - ph1 x 80mm philips.
1 - ph2 x 100mm philips.
2 - Screw Grippers
The screwdriver tips have been correctly hardened so as not to damage the
screw head and to provide a long service life.
Laser Etched Tips:
An important feature on these screwdrivers is the "Slip Stop tips", they have
precision angled laser cut grooves in the tips which grip the screw head when
you are tightening or undoing a fixing.
This etched tip enables the screwdriver to grip the head of the screw or fixing
when pressure is exerted and greatly reduces the risk of the screwdriver
sliping out of the screw.
Using the Screw Grippers:
The screw grippers provide a real benefit when you are working overhead or
are having to stretch to put a screw in.
The screw grippers slide over the shaft of the screwdriver until the sprung loaded
jaws are almost level with the tip, you then place the screw between the jaws and
slide it up so that tip of the screwdriver is in the end of the screw.
This holds the screw and you are able to start screwdriving without the screw
falling off the end of the screwdriver. asyou are tightening the last few turns of
the screw, the jaws of the screw gripper automatically open and release the
screw so that you can drive it home flush with the surface.
Fully tested individually for dielectric strength under a load of 10,000 volts so
as to ensure safe working with loads up to 1,000 volts.
YouTube Demonstration Video
Wera VDE Electrical Insulated Screwdriver 6pce Set and Screw Grip
Wera Manufacturers Page
See all the Screwdriver and Bit Options
Extensions
Recommended Products
