Skip to Content
Shopping Basket
Your basket is empty.

Sika Sikabond MS Wood Floor Flooring Adhesive 600ml Box 12 FPSKBDMSFL6

Ref: QR29722
Sika Sikabond MS Wood Floor Flooring Adhesive 600ml Box 12 FPSKBDMSFL6
£112.20
£134.64 inc. VAT
NOW £69.56
£83.48 inc. VAT
In Stock

Purchase

Total Discount Price:

? x Sika Sikabond MS Wood Floor Flooring Adhesive 600ml Box 12 FPSKBDMSFL6:
£83.48
 
£69.56 ex VAT
Select Quantity and choose Add To Basket

Description

Sika Sikabond MS Wood Floor Adhesive 600ml Box 12 FPSKBDMSFL6

 

 

 

Sikabond MS Wood Floor Flooring Adhesive 600ml Box 12 FPSKBDMSFL6
 

 

 

Sika Sikabond MS Wood Floor Flooring Adhesive 600ml Box of 12

Trade Product Option: FPSKBDMSFL6

Barcode: 5055492700933

Description and Uses:

SikaBond MS Wood Floor 600ml is a high quality, trowel applied adhesive for bonding wooden floors to all common building substrates whilst remaining permanently elastic thus accommodating differential movement associated with changing climatic conditions.

The formulation is completely water and solvent free thereby eliminating the possibility of wooden block and planks warping or cupping due to VOC’s.

Sikabond MS has an open time of approximately 60 minutes this makes this product also ideal for larger areas and ease of adjustability.

 

Benefits:

Gun grade 600ml.

Will not cause warpage or curling of wooden blocks and planks.

Bonds directly to all common subfloor materials concrete, wood, metal, ceramic tiles, vinyl, and most natural stone floors.

Suitable for use with under floor heating

Excellent gap filling properties for uneven surfaces

Full bed elastic product gives excellent sound dampening acoustic properties

Isocyanate Free

 

Limitations:

Do not use directly over bitumen or asphalt floors, or substrates that bleed oil or plasticizers.

Do not use, store or allow to cure below +5oC.

Do not use on wet substrates.

Ensure substrate is completely dry or SikaBond Rapid DPM has been applied.

Do not use damp proof membranes over Anhydrite / Calcium Sulphate or other Gypsum based screeds.

This product is only suitable for direct applications to clean, dry subfloors where moisture levels are below that required by the wood flooring manufacturer. If in doubt apply SikaBond Rapid

Ensure conditions are suitable for the installation of wood flooring.

 

Surface Preparation:

Always check moisture level of subfloor with suitable equipment and ensure that the moisture content is <2% CM or in the case of Gypsum based screed <0.5% CM.

On cement based substrates where moisture levels are above 2%CM but below 5%CM install a liquid applied damp proof membrane such as SikaBond Rapid DPM.

All surfaces must be sound, clean, dry and free from dust, grease or other contaminants that can reduce adhesion.

Existing floors must be free from all polish and wax.

Residues of old adhesive not being isolated with Sika Primer-MB or SikaBond Rapid DPM must be removed mechanically as they may affect adhesion.

Always check and record moisture content of subfloor.

Basement/below ground floors must be adequately protected with a damp proof course and two coats of SikaBond Rapid DPM.

 

Further Preparation:

Turn off any underfloor heating systems 48hours before and 48 hours after applying the adhesive.

Ensure that wood flooring is acclimatised in strict accordance with wood flooring manufacturer’s requirements.

 

Application:

Always check with flooring manufacturer re: any specific instructions/requirements specifically

 

Coverage:

Spread the adhesive uniformly on the sub-floor with a suitable notched trowel at no less than 0.6kg/m2.

Do not spread more adhesive than can be covered within 20 minutes.

Place wood in position whilst adhesive is still wet, press firmly and evenly across the wood surface to ensure complete contact with the adhesive.

Ensure you leave a 12-15 mm expansion gap along the walls and around protrusions to allow for the natural expansion of the wood.

Floor can be trafficked sanded or coated after 24 hours (+23 °C / 50% r. h.)

Non-absorbent surfaces will take longer to cure

Use any opened material within 2 weeks.

If a small skin is present under plastic disc of opened bucket, please discard and trowel remaining product as detailed. This will not affect the quality of the product.

 

Cleaning:

Fresh, uncured adhesive remaining on the wood surface must be removed immediately and if necessary cleaned with Everbuild wonder Wipes.

 

Sika Datasheets:

 

Sikabond MS MSDS Safety Datasheet

 

Related Tub Product:

 

Sika Sikabond MS Wood Floor Flooring Adhesive 14kg SKBDMSFL14

 

See All Wood Floor Adhesives

See All Sika Products

Extensions

default
Reference Code:
FPSKBDMSFL6
Option Text:
600ml Box of 12