Skip to Content
Shopping Basket
Your basket is empty.

Everbuild Quick Drying Clear Satin Varnish 2.5 Litre WVARCLS2

Ref: QR27205
Everbuild Quick Drying Clear Satin Varnish 2.5 Litre WVARCLS2
£27.95 inc. VAT
NOW £14.91
£17.89 inc. VAT
In Stock


Total Discount Price:

? x Everbuild Quick Drying Clear Satin Varnish 2.5 Litre WVARCLS2:
£14.91 ex VAT
Select Quantity and choose Add To Basket


Everbuild Quick Drying Ultra Hard Clear Varnish Satin 2.5 Litre






Quick Drying Ultra Hard Clear Varnish - Satin 2.5 Litre

Product Option: WVARCLS2

Ideal for use on interior wood such as tables, chairs, doors, skirtings, furniture etc.

Low Solvent Formula

Touch dry in 30 minutes, overcoat after 1 hour.

Clear finish, no discoloration.

Surface Preparation

Everbuild Quick Drying Clear Varnish is a professional, low solvent clear varnish

Enhances the natural qualities of wood,

Provides long lasting protection.

Developed specifically to give an ultra-hard, scratch resistant, heatproof, non-yellowing finish.


Up to 16 square metres per litre. Coverage will vary depending on the absorbency of the wood.


Ensure wood is clean, dry and free from dirt or dust by wiping with a lint free cloth dampened with white spirit, allow to dry before applying varnish.

On varnished wood, remove any unsound varnish and sand the surface with medium grade sandpaper well to a uniformed appearance and then clean with white spirit. Allow to dry thoroughly before applying Everbuild Clear Varnish. On bare wood, sand the surface with fine sandpaper. Always remove excess dust with a cloth before applying varnish.

Brush apply Everbuild Clear Varnish, following the direction of the wood grain, approximately 2-3 coats will be required for full coverage. It is touch dry in 30 minutes, allow 1 hour in between coats lightly sand the surface before applying the final coat. Always apply the varnish to a wet edge, working systematically across the surface keeping the wet edge moving together as much as possible.

Clean brushes thoroughly with water after use, a little washing up liquid will assist brush cleaning.

If water is accidently spilt on the surface within 2-3 days of application, remove by wiping gently (do not rub) with a soft cloth.

Note: on application, the varnish will appear slightly white; this quickly turns completely clear as the drying process starts.


Important notes

Do not use on wood floors or decking.

Do not use externally.

Protect from frost and do not use in temps below 10°C.


WVARCLS2 Datasheets:


Everbuild Clear Varnish MSDS Safety Data Sheet

Everbuild Clear Varnish Technical Data Sheet



Reference Code:
Option Text:
2.5 Litre Satin
Option Colour: