EVERBUILD PINK GRIP SF SOLVENT FREE ADHESIVE PINKGRIP 350ML
Solvent free gap filling adhesive specifically formulated for the professional user.
The product can be used to replace mechanical fixings in a wide variety of home improvement applications.
Ideal for bonding wood, brick, plaster, plasterboard, polystyrene, metals and plastics.
Solvent free - environmentally friendly formulation
Excellent adhesion bond strength adheres to most common surfaces.
Enhanced slump resistance for quick simple direct bonding
Without the need for temporary support in many applications.
Good "nip off" quality to prevent messy stringing of adhesive.
High solids formulation -excellent gap filling properties without shrinkage.
Extended open time - allows for easy repositioning after fixing.
Will adhere to damp surfaces.
Water clean up no hazardous solvents.
Pink Grip SF Areas for Use:
Bonding dado rails, architraves and skirting.
Fixing wall cladding direct to internal wall surfaces or timber battens.
Fixing battens directly onto walls without fastenings.
Bonding carpet gripper systems to most floors without the need for nails or tacks.
Bonding stair nosing to concrete or wooden stairs.
Securing aluminium or other skin panels to the framework
Portable industrial buildings & caravans.
Solvent Free Limitations:
Do not use in situations where both surfaces are non-porous
I.e.: plastic to plastic metal to metal use PINK GRIP solvent based.
Do not use as a mirror adhesive: use EVERBUILD MIRROR MATE
Caution External use:
The product will cure at a dramatically slower rate when used externally.
For this reason we recommendf or external applications
EVERBUILD PINK GRIP which is a solvent based product
The surfaces to be glued should be clean and free from dust, grease and other contaminants.
Wood, plaster and brick may be damp but not running wet.
Use mechanical abrasion to clean porous surfaces if necessary before application.
Apply PINK GRIP SF to one side either in strips or dabs or by trowel for low viscosity grade
Position the object to be fixed, then move from side to side and simultaneously apply pressure to achieve an even bond.
If the object is wrongly positioned, slide it to the correct position.
Finally, apply maximum pressure for a short time. Up to 1 minute wipe away any excess with a damp cloth making a neat joint between the two bonded surfaces.
Temporary mechanical fixings may be required for heavy objects while full bond strength is reached.
Sika Everbuild Data Sheets:
|Option Text||Solvent Free|