Everbuild Black Jack Lead Grey Colour Self Adhesive Flashing Tape 10m x 300mm
Sika Code 482962
MPN FLAS300
Barcode 5029347099053
Everbuild Flashing Tape 300mm 12 inch Wide Aluminium foil and bitumen rubber self adhesive flashing tape in Lead Grey Colour
The adhesive forms a strong waterproof seal by the simply pressing the tape into place by hand or roller.
Areas Flashing Tape Can Be Use and Benefit:
Important Product Notes:
Prime porous surfaces with Everbuild flashing primer
Do not apply to damp surfaces
In cold weather adhesion may be reduced
Bring up to temperature or heat bitumen adhesive layer with a hot air gun to improve adhesion & pliability
Awkward areas and tops of existing lead flashing can be pointed using Everbuild Lead mate
Preparation of Surfaces and Application:
Surfaces must be dry,
Sound free from oil, grease and dust
Remove all loose material by scraper or wire brush
Porous surfaces, such as concrete or brick, should be primed using Everbuild flashing primer
Cut to the required length peel beck approximately 5cm of release carrier and place the tape into position Continue removing the release carrier whilst firmly placing the tape and avoid unnecessary creasing, ensure intimate contact and ensure no air is trapped, using a small roller ensure that all edges and overlaps are sealed properly, overlaps should be at least 25mm.
Everbuild Official Data Sheets:
Everbuild 300mm Flashing Tape Instructions Technical Data Sheet
Everbuild Flashing Tape Product Page
Data | |
Manufacturer | Everbuild |
Reference Code | FLAS300 |
Reference Code sika | 482962 |
Length | 10 Meter |
Width | 300mm |
Colour | Lead Grey |
Name | Link |
---|---|
Everbuild Black Jack Flashing Tape Instructions Technical Data Sheet | Download Attachment |
Everbuild Black Jack Flashing Tape Safety Data Sheet | Download Attachment |