Everbuild 710 Febflor Self Level Flexiplus Floor Levelling Compound 20kg SLPLUS20

Everbuild 710 Febflor Self Level Flexiplus Floor Levelling Compound 20kg

Barcode 5029347071028

Sika Code 620325

MPN SLPLUS20

EVERBUILD 20kg 710 SELF LEVEL FLEXIPLUS is a latex modified cement based powder that can be overlaid within 8 hours

Everbuild 710 Flexiplus already contains powdered latex, eliminating the need for separate expensive latex liquids.

When mixed as directed the compound provides a free flowing mix that sets in 90 minutes

Can be over laid after only 8 hours at normal temperatures.

Can be used to level out uneven floors and screeds.

Typical surfaces include concrete and screeding, existing ceramic tiles, asphalt, wood, brick, stone etc.

Intended for use prior to laying ceramic tiles, thermoplastic tiles, lino, wood block flooring or carpet.

Not suitable for a final wearing surface this product is intended for use prior to laying ceramic tiles, thermoplastic tiles, lino, wood block flooring or carpet.

710 Flexiplus Benefits

For Internal use

Enhanced flow properties coupled with long open time giving easy trowelling.

Fast setting - sets in 8 hours.

Up to 6mm in depth in one coat

Protein casein free.

Flexiplus uses

Levelling uneven subfloors prior to covering tiling without the need to use a

separate latex additive

Important Product Notes:

NOTE: This product is not suitable for use as a final wearing surface.

Always mix with clean fresh water or use Everbuild 409 and always prime floors as directed.

Surfaces can be primed using Everbuild PVA Bond diluted 1:3 with water.

The product will not resist rising damp. In these conditions, use in conjunction with BLACK JACK D.P.M liquid damp proof membrane as directed.

Never exceed the quantity of water stated this will dramatically reduce strength and cause cracking.

Do not mix more compound than can be laid in 20 minutes and never try to reconstitute once the product has set.

On substrates where underfloor heating is in place, switch of the heating for 24 hours before and after application.

Do not use this product below 4 degree C.

SLPLUS20 Datasheets

Everbuild 710 Technical Data Sheet

Everbuild 710 MSDS Safety Data Sheet

Everbuild 710 DOP Declaration Of Performance

Everbuild 710 Manufacturer Product Page

Important Note this is a non-returnable product

while in our care all products are kept in a climate-controlled storeroom.

because this is a reactive product we could not resell the product.

The Product should be stored out of direct sunlight until used.