Everbuild 201 Mortar Admix Plasticiser 25 Litre ADM25L Admixture

Brand: Everbuild
 QR29221 |  In Stock

  • RRP£36.63 Inc. VAT
  • OUR PRICE £14.08

    £16.90   Inc. VAT
  • Product Code: ADM25L
  • SKU: 486189
  • EAN: 5029347002169
  • MPN: 


Interest free

Trade Option 25 Litre

Everbuild 201 Mortar Admix Plasticiser Admixture 25 Litre Tub

MPN ADM25L

Sika Code 486189

Barcode 5029347002152


201 Mortar Admix 25 Litre Everbuild mortar admixture is a liquid plasticising air entraining admixture which forms extremely stable air bubbles in mortar mixes this improves the workability of bricklaying and plastering mortars and significantly increases their resistance to freeze thaw cycles and the mix remains plastic for longer and educes bleed and segregation of mortar helps also to reduce efflorescence.

Everbuild 201 admix improves workability and freeze-thaw resistance in brick laying mortars, reduces the need for lime and smooth's out variations between separate batches of sand and cement.

Do not under any circumstance use washing up liquid as this will damage the bond creating a week and sometimes dangerous results.


Areas of Use:

  • Brickwork including Load bearing brick work and block laying.
  • External and Internal rendering.
  • Pointing and repointing brickwork.


Everbuild 201Benefits:

  • Out performs traditional Vinsol Resin Based plasticisers See the Technical Data Sheet in the download area.
  • Contains a special additive which keeps air in the mix longer than most other competitive admixtures.
  • Improves trowel-ability.
  • Easier tamping down and alignment and improves work ability.
  • Provides resistance to freeze-thaw cycling down to -2 degrees C in both wet and dry mortar.
  • Chloride free - chloride ion content 0.1 percent.
  • Reduces bleeding.
  • Replaces lime in mix, hence reduces possibility of lime bloom and efflorescence.


Important Notes:

Do not use in structural concrete.

Do not overdose.

Do not mix with other additives in same gauging water.

Do not use in lime based mixes


Application:

In all cases add to mix at an addition rate of 150ml to 250ml per 50kg cement depending on the degree of plasticising entrainment required.

Note: remember to reduce required quantity of water accordingly.


One litre of MORTAR ADMIX added to a 200 litre drum of gauging water will be sufficient for gauging approximately 4 x 50kg cement for mortar or render mixes.

Whilst overdosing should be avoided, this formulation does safe guard against moderate over dosing up to double the maximum rate.

The following are examples of modified mix designs.

1: 0.25 :3 cement : lime :sand.

use 1 : 3 cement : sand : + MORTAR ADMIX.

1: 1:6 cement : lime : sand.

use 1 : 6 cement : sand + MORTAR ADMIX.


BRICKLAYING/POINTING Use a mix design appropriate to brick strength

(1 : 3 to 1 : 6).

INTERNAL RENDERS - 1 : 6 + MORTAR ADMIX.

EXTERNAL RENDERS - 1 : 3 + MORTAR ADMIX.


Everbuild Datasheets:

Everbuild 201 Mortar Admix 25 Litre Technical Data Sheet

Everbuild 201 Mortar Admix 25 Litre Safety Data Sheet

Everbuild 201 DOP Declaration of Performance

Everbuild 201 Manufacturer Product page

Data
Manufacturer Everbuild
Reference Code ADM25L
Reference Code sika 486189
Type Liquid Mortar Admixture
Size 25 litre
Name Link
Everbuild 201 Mortar Admix Admixture Safety Data Sheet Download Attachment
Everbuild 201 Mortar Admix Admixture Technical Data Sheet Download Attachment
Everbuild 201 Mortar Admix Declaration Of Performance Download Attachment

Related Products