Everbuild Quick Drying Clear Varnish Satin 250ml WVARCLS02
Description
Everbuild Quick Drying Ultra Hard Clear Varnish Satin 250ml

Everbuild Quick Drying Ultra Hard Clear Varnish Satin 250ml
MPN: WVARCLS02
Barcode: 5029347611477
Description:
Everbuild Quick Drying Satin Clear Varnish is a professional, low solvent
clear varnish
Enhances the natural qualities of wood,
Provides long lasting protection.
Developed specifically to give an ultra-hard, scratch resistant,
heatproof, non-yellowing finish.
It is ideal for use on interior wood such as tables, chairs, doors,
skirtings, furniture etc.
Low Solvent Formula
Touch dry in 30 minutes, overcoat after 1 hour.
Clear finish, no discoloration.
Surface Preparation
Coverage:
Up to 16 square metres per litre.
Coverage will vary depending on the absorbency of the wood.
Application:
Ensure wood is clean, dry and free from dirt or dust by wiping with a lint
free cloth dampened with white spirit, allow to dry before applying varnish.
On varnished wood, remove any unsound varnish and sand the surface with
medium grade sandpaper well to a uniformed appearance and then clean
with white spirit.
Allow to dry thoroughly before applying Everbuild Clear Varnish.
On bare wood, sand the surface with fine sandpaper.
Always remove excess dust with a cloth before applying varnish.
Brush apply Everbuild Clear Varnish, following the direction of the wood grain,
approximately 2-3 coats will be required for full coverage.
It is touch dry in 30 minutes, allow 1 hour in between coats lightly sand
the surface before applying the final coat.
Always apply the varnish to a wet edge, working systematically across
the surface keeping the wet edge moving together as much as possible.
Clean brushes thoroughly with water after use, a little washing up liquid
will assist brush cleaning.
If water is accidently spilt on the surface within 2-3 days of application,
remove by wiping gently (do not rub) with a soft cloth.
Note: on application, the varnish will appear slightly white; this quickly
turns completely clear as the drying process starts.
Important notes
Do not use on wood floors or decking.
Do not use externally.
Protect from frost and do not use in temps below 10 deg C.
WVARCLS02 Information:
Everbuild Clear Varnish Technical Data Sheet
Everbuild Clear Varnish Gloss MSDS Safety Data Sheet
Everbuild Clear Varnish Matt MSDS Safety Data Sheet
Everbuild Clear Varnish Satin MSDS Safety Data Sheet
Manufacturer Everbuild Interior Varnish Product Page
Extensions
Recommended Products
