Skip to Content
Shopping Basket
Your basket is empty.

Everbuild Floor Varnish Clear Gloss 2.5 Litre FLOORVGL2

Ref: QR27207
Everbuild Floor Varnish Clear Gloss 2.5 Litre FLOORVGL2
£45.60 inc. VAT
NOW £26.60
£31.92 inc. VAT
In Stock


Total Discount Price:

? x Everbuild Floor Varnish Clear Gloss 2.5 Litre FLOORVGL2:
£26.60 ex VAT
Select Quantity and choose Add To Basket


Everbuild Quick Drying Ultra Hard Clear Floor Varnish Gloss 2.5 Litre

Everbuild Floor Varnish Clear Gloss 2.5 Litre FLOORVGL2

Everbuild Floor Varnish Clear Gloss 2.5 Litre

Bar Code: 5029347612597



Quick drying varnish ideal for use on most common types of wooden floors

including hardwood, softwood, hardboard, chipboard and

composite wooden boards.

Everbuild Ultra Hard Floor Varnish has been specifically developed to provide

an ultra-hard scratch resistant natural finish to most interior wooden floors.

Suitable for use in kitchens, bathrooms, lounge, dining areas or where

heavy foot traffic would be expected.

Low Solvent Formula

Touch dry in 30 minutes.

Protects wood against scratches and spills.

Clear finish, no discoloration.

Surface Preparation:

On unvarnished floors:

Ensure wood is clean, dry and free from dirt or dust by wiping with a soft cloth

and white spirit.

Any existing coatings must be removed prior to application with a suitable

sander using 120 grade abrasive paper.

A suitable dust mask should be worn while sanding.

Allow any dust to settle then vacuum the floor to remove any dust or debris.

Fill in any holes or surface imperfections using Everbuild Multi-Purpose

Wood Filler.

Existing varnished floors:

Should be thoroughly sanded using 120 grade abrasive paper to provide a

key for Everbuild Ultra Hard Varnish to be applied.

Floors should be vacuumed, wiped down with white spirit and allowed to dry.

Any existing varnish in poor condition should be completely removed prior

to application.

Floor Varnish Application:

Stir product well before use and periodically during application.

Brush apply Everbuild Ultra Hard Floor Varnish following the direction of the

wood grain.

Apply a minimum of 3 coats allowing 1 hour between coats.

Lightly sand the surface before applying the final coat.

Always apply the varnish to a wet edge working systematically across the

surface keeping the wet edge together as much as possible to avoid overlap.

Ultra Hard Floor Varnish:

Can be walked on after approximately 8 hours depending on ambient

temperature and conditions.

Allow 72 hours before subjecting to heavy foot traffic.

Do not cover with carpets or rugs for at least 7 days.

Protect from water for 5 days.

Clean brushes thoroughly after use with warm soapy water.

FLOORVGL2 Everbuild Datasheets:

Everbuild Floor Varnish MSDS Safety Data Sheet

Everbuild Floor Varnish Technical Data Sheet

Manufacturer Floor Varnish Product Page


Reference Code:
Option Text:
2.5 Litre
Option Colour: